Key Features

• Measurement of sensor output, etc. with high sensitivity range of 100 mV f.s.
• Isolated 4 channel input
• Max. rated voltage to ground (direct input) 30 V AC, 60 V AC; (when combined with the 9665) 300 V AC or DC (CATⅡ)
• High speed sampling of 5 MS/s ensures high-speed phenomena are captured
• High 16-bit A/D resolution
• For Memory HiCorder MR6000 and MR8740T

Key Features

• High 16-bit A/D resolution
• Isolated 2 channel input
• Max. rated voltage to ground: 300 V AC, DC

Key Features

• Charge input terminal for piezoelectric type acceleration pickup
• Isolated 2 channel input
• Max. rated voltage to ground: 30 V AC or 60 V DC
• Acceleration pickup with built-in preamplifier can also be directly input (BNC terminal)
• Equipped with constant current source for driving preamplifier
• Even measure general voltage signals with high, 16-bit A/D resolution
• Equipped with anti-aliasing filter essential for FFT analysis
• TEDS compatible, automatic sensitivity setting

Key Features

• Achieve large current measurement with high accuracy
• 3 channel input
• Automatically recognize and scale simply by connecting the sensor
• High speed sampling of 5 MS/s ensures high-speed phenomena are captured
• High 16-bit A/D resolution
• For Memory HiCorders MR6000 and MR8740T

Key Features

• High-speed sampling of 200 MS/s ensures catching high-speed phenomena
• Isolated 2 channel input
• Max. rated voltage to ground: 1000 V AC or DC (CAT II)
• High resolution measurement with 12 bit A/D
• For Memory HiCorder MR6000 only

Key Features

• Input unit capable of DCV and ACV high voltage input
• Isolated 2 channel input
• Maximum rated voltage to ground: 1000 V AC or DC (CAT III), 600 V AC or DC (CAT IV)
• Directly input up to 1000 V DC or 700 V AC
• High-speed sampling of up to 1MS/s

Key Features

• Increases the number of logic probe terminals
• Install up to 4 units in the Memory HiCorder to achieve a maximum of 16 logic channels

Key Features

• Clamp connection, up to 500 A AC/DC, automatic sensor identification, easy operation
• 2 channel input
• From low to high frequency, wide bandwidth RMS rectifier installed (DC, or 30 Hz to 10 kHz)
• Monitor instantaneous waveforms without the need to pass through the rectifying circuit
• High 12-bit A/D resolution
  *Not available for MR8741

Key Features

• Fluctuating frequency measurement of power lines for commercial power (direct input of up to 200 V class line)
• Isolated 2 channel input
• Max. rated voltage to ground: 300 V AC or DC (CAT II)
• Pulse counting for the encoder
• Used in measuring motor rotation, pulse integration, duty ratio, and pulse width
• Encoder divider function