Supplier, Suppliers, Supply, Supplies DC Power Supply GW Instek ~ Mobicon - Remote Electronic Sdn Bhd

Visit
Official Website

Mobicon - Remote Electronic Sdn Bhd
19, Jalan PJS 3/59,
Taman Sri Manja,
46000 Petaling Jaya,
Selangor, Malaysia.

+603-7783 2257

+603-7783 4316
+603-7783 4318

sales-kl@mobicon.com.my

DC Power Supply Selangor, Malaysia, Kuala Lumpur (KL), Petaling Jaya (PJ)

GW INSTEK SPD-3606 Multiple Output Dual Range D.C. Power Supply Features Three independent, isolated output CH3 adjustable output : 0.1~5V/3A High efficiency power conversion (up to 25% more than traditional power supply) Remote output on/off control OVP to protect the DUT OTP to protect SPD-3606 to decreas the repair rate Compact size, light weight Low Fan acoustic noise with fan speed control circuit Voltage/current protection knob (option)	GW INSTEK GPE-x323 Series Multiple Output Linear D.C. Power Supply Features 1 / 2 / 3 / 4 Independent Isolated Output 4.3 Inch LCD Display Setting & Read back Resolution 100mV / 10mA (*1) Output ON/OFF Analog Control (Remote I/O) for Output ON / OFF Set View function for checking an original V / I setting during output on Key Lock Function Tracking series and parallel operation Smart cooling fan achieving low noise Optional European Jack Type Terminal	GW INSTEK GPC - Series Triple Output Linear D.C. Power Supply Features Triple Output Auto Tracking Auto Series and Parallel Operation Constant Voltage and Constant Current Operation Low Ripple and Noise Internal Select for Continuous or Dynamic Load Overload and Reverse Polarity Protection 3 1/2 Digits 0.5'' LED Display 5V, 3A Fixed Output (Note: GPC-3060D/6030D are not CE approved)	GW INSTEK GPS-x303 Series Multiple Output Linear D.C. Power Supply Features 4 Independent Isolated Output Four ''3 Digits'' LED Displays 0.01% Load and Line Regulation Low Ripple and Noise Tracking Operation and Auto Series/Parallel Operation Output ON/OFF Switch Output Voltage and Current Setting When Output Disable Fan Speed Control Circuit to Minimize Fan Noise Over Load and Reverse Polarity Protection Optional European Jack Type Terminal
GW INSTEK SPS - Series Switching D.C. Power Supply Features Dual Measurement Display 0.01 % High Regulation Constant Voltage and Constant Current Operation High Efficiency High Power Density Over Voltage Protection Remote Output ON/OFF Control	GW INSTEK GPR-M Series Linear D.C. Power Supply Features 0.01% High Regulation Constant Voltage and Constant Current Operation Internal Select for Continuous or Dynamic Load Low Ripple and Noise Overload and Reverse Polarity Protection 3 1/2 Digit 0.5'' LED Display	GW INSTEK GPS-Series Linear D.C. Power Supply Features Light and Compact Design 0.01% High Regulation Constant Voltage and Constant Current Operation Remote Control for External Programmability Internal Select for Continuous or Dynamic Load Low Ripple and Noise Overload and Reverse Polarity Protection Series or Parallel Operation Optional European Type Jack Terminal for GPS-3030/GPS-3030D/GPS-3030DD	GW INSTEK GPR-H Series Linear D.C. Power Supply Features 0.01% High Regulation Constant Voltage and Constant Current Operation Internal Select for Continuous or Dynamic Load Low Ripple and Noise Overload and Reverse Polarity Protection 3 1/2 Digit 0.5'' LED Display Internal Select for Continuous or Dynamic Load (for GPR-3510HD/GPR-6060D/GPR-7550D)
GW INSTEK PST-Series Multiple Output Programmable Linear D.C.Power Supply Features Digitized programmable interface high resolution 10mV, 1mA 192 x 128 LCD display, simultaneously Over-voltage, over-current, over temperature protection Intelligent fan control (changes by output power) 100 Sets memory Auto step running with timer Provided auto series and parallel function Labview driver Standard interface: RS-232C Optional: GPIB (IEEE-488.2)	GW INSTEK PPT-Series Multiple Output Programmable Linear D.C. Power Supply Features Easy operation with UP/DOWN key High Resolution: 10mV, 1mA Over voltage protection, over current protection by hardware 50 Sets memory Self test and software calibration Meets UL CSA IEC Safety Regulation Auto Step Running With Timer Setting FRONT/REAR Output and Sense Switch Selectable Triple Output Auto Series and Parallel Operation Auto Tracking IEEE-488.2 and SCPI Compatible Command set Labview Driver Software Available High Stability, Low Drift 4 Digit Display	GW INSTEK GPD-Series Multiple Output Programmable Linear D.C. Power Supply Features 2/3/4 Independent Isolated Output 4 LED Display Sets: 3 digits after decimal point Minimum Resolution : 1mV/1mA(GPD-2303D/GPD-3303S/GPD-4303S) 100mV/10mA(GPD-3303D) Digital panel control(rotary encoder Switch, rubber key with indicator) User-friendly operation, coarse/fine volume control 4 Sets Save/Recall Key-Lock Output on/off Tracking Series and Parallel mode Smart cooling fan achieving low noise USB Standard Interface PC Software & USB Driver Labview driver	GW INSTEK PPH-1503D & PPH-1506D & PPH-1510D Programmable High Precision D.C. Power Supply Features Dual Channel DC Power Output PPH-1503D (CH1: 0~15V/0~3A or 0~9V/0~5A; CH2: 0~12V/0~1.5A) PPH-1506D (CH1: 0~15V/0~3A or 0~9V/0~5A; CH2: 0~12V/0~3A) PPH-1510D (CH1: 0~15V/0~3A or 0~9V/0~5A, 0~4.5V/0~10A(Rear terminal); CH2: 0~12V/0~3A) 3.5 inch TFT LCD Display Built-in DVM Measurement Function High Measurement Resolution (1mV/0.1μA for 5mA Range) Current Sink Function (Maximum : 3.5A) Pulse Current Measurement Long Integration Current Measurement Sequence Function (Sequential power output) Built-in Battery Simulation Function OVP, OCP, OTP & Temperature Display for Heat Sink Support USB (Device& Host)/GPIB/LAN 5 Groups of Save/Recall Setting External RELAY Control
GW INSTEK PPE-3323 Multi Output Programmable Linear D.C. Power Supply Features Easy operation with UP/DOWN key High resolution: 10mV, 1mA Over voltage protection, over current protection by software 50 Sets memory Self test and software calibration Meets UL, CSA, IEC safety regulation Auto step running with timer setting Triple output Auto tracking RS-232 communication High stability, low drift	GW INSTEK GPP - Series Multi-Output Programmable D.C. Power Supply Features 4.3”TFT LCD Display Supports Setting Value, Measurement Value and Output Waveform Display Load Function (CC, CV, CR Mode) Setting Resolution: 1mV / 0.1mA; Read Back Resolution: 0.1mV / 0.1mA Low Ripple Noise: ≦350uVrms/ ≦2mArms Transient Response Time: ≦50uS Utilizing Hardware to Realize Over Voltage Protection / Over Current Protection / Over Temperature Protection Delay Function / Output Monitoring Function / Output Recorder Function Intelligent Temperature Control Fan Effectively Reduces Noise Sequential Output Function and Built-in 8 Template Waveforms The Output Recorder Function Records The Output Voltage & Current Parameters with A Minimum Recording Interval of 1 Second. Provides 10 Sets of Memory for Each Sequence/Delay/Recorder/Panel Setting Condition GPP-3323 Supports A USB (Type A) Output Terminal Standard: RS-232, USB, Ext I/O ; Optional: LAN, GPIB+LAN Compatible with Commands of GPD-x303S Series	GW INSTEK PSH-Series Programmable Switching D.C. Power Supply Features Wide input voltage range and high power factor (P.F) high efficiency and high power density Constant voltage and constant current operation Over voltage over current and over temperature protection Low ripple and noise Output on/off control Self-test and software calibration LabView driver Standard interface : RS-232C Optional interface : GPIB ( IEEE-488.2 )	GW INSTEK PSS-Series Programmable Linear D.C. Power Supply Features Digitized Programmable Interface High Resolution 10mV, 1mA High Stability, Low Drift Over-Voltage, Over-Current, Over Temperature Protection Intelligent Fan Control (Changes by Output Power) Built-in Buzzer Alarm Labview Driver Standard Interface: RS-232C Optional Interface: GPIB (IEEE-488.2) Optional European Jack Type Terminal
GW INSTEK PSB-2000 Series Programmable Switching D.C. Power Supply Features Output Voltage Rating : 80V/800V Output Power Rating : 400W~800W Constant Power Output for Multi-Range(V&I)Operation Series and Parallel Operation(2 Units in Series or 4 Units in parallel Maximum) Sequence function edited by PC will be controlled through power supply optional interface Standard Interafce: RS-232C / USB / Analog Control Interface Optional Interface: GPIB	GW INSTEK PSW-Series Programmable Switching D.C. Power Supply Features Voltage Rating: 30V/80V/160V/250V/800V, Output Power Rating: 360W ~ 1080W Constant Power Output for Multiple Range (V&I) Operation CV/CC Priority; Particularly Suitable for the Battery and LED Industry Adjustable Slew Rate Series Operation: Up to 2 units (30V, 80V, 160V models only) Parallel Operation: Up to 3 units High Efficiency and High Power Density 1/2, 1/3, 1/6 Rack Mount Size Design (EIA/JIS Standard) for 360W/720W/1080W Standard Interface: LAN,USB,Analog Control Interface Optional Interface: GPIB-USB Adaptor, RS232-USB Cable LabView Driver	GW INSTEK PLR - Series Low Noise D.C. Power Supply Features Output Voltage Rating：20V / 36V / 60V Output Power：360W / 720W Low Ripple and Noise (0.5mVrms/ 10mArms) Fast transition recovery time(100us) Maximum 2 units in series connections or 3 units in parallel connections Select the setting digits for voltage and current(coarse/ fine volume control) Panel Lock Function 3 set of preset function Output off timer function(Range:1 min to 1000 hours & 59mins) CC priority function(prevent overshoot & inrush current) Sequence function of PC editing(Max.: 1000 steps/ Min. step period: 50ms) Protection: OVP, UVP, OCP, remote sensing(Terminal open) External Analog Control Function PC Remote Interface (Standard)：RS-232; (Optional) ： GPIB / USB / LAN CE Compliance	GW INSTEK PSP - Series Programmable Switching D.C. Power Supply Features LCD display Output on/off control 3-step fan speed control Voltage/current/power settings Key lock to avoid operation error OVL / OCL /OPL /OTP protection Normal, +% & -% output operation key High efficiency and high power density Standard interface：RS-232C Optional European type jack terminal
GW INSTEK PSM - Series Programmable Dual-Range D.C. Power Supply Features Single Output Dual Range Max. 200W High resolution: 1mV/1mA 0.01% load/line regulation, 350uVrms ripple Auto step runing with timer setting and 100 Sets memory Safety design: OVP,OCP & OTP;Output ON/OFF control Self-test and software calibration Highly visible vacuum-fluorescent display Front and rear output terminal Standard interface : RS-232C, GPIB Option : European Jack Type Terminal	GW INSTEK PSB-1000 Series Programmable Multi-Range DC Power Supply Features LCD display and menu-typed functionality selection Support front panel output terminals (Max.30A) and rear panel output terminals (Rating current output) Bleeder circuit control I/V Control function Sequence function Power on Configuration Internal Sense Control( Disable/ front panel/ rear panel) Voltage trigger function Output delay function OCP Control function Interface: USB Host, LAN, option: GPIB (PSB-105)	GW INSTEK PPH-1503 Programmable High Precision D.C. Power Supply Features Dual Range Output (0~15V/0~3A) or (0~9V/0~5A) 3.5 Inch TFT LCD Display Constant Voltage and Constant Current Operation Built-in DVM Measurement Function High Measurement REsolution (1mV/0.1mA for 5A Range);(1mV/0.1uA for 5mA Range) EXternal Relay Control Output On/Off Sink Current Capability (Maximum:2A) Digital Panel Control Selectable Output and Input (DVM) Ports From Front or Rear Panel Key Lock Function 5 Sets of Preset Memory Including Power Output ON/OFF States High Speed Transient Recovery Time(<40us within 100mV ; <80us within 20mV) OVP/OCP/OTP Protection to Prevent DUT Damage Standard Multiple Interfaces: USB / LAN /GPIB Labview Driver and PC Remote Control Software

© 2019 - 2024 Mobicon - Remote Electronic Sdn Bhd (548591-V)
Visitors: 2907627
Powered by N.MY

Recent Updates