Supplier, Suppliers, Supply, Supplies Super Megohm Meters HIOKI ~ Mobicon - Remote Electronic Sdn Bhd

Visit
Official Website

Mobicon - Remote Electronic Sdn Bhd
19, Jalan PJS 3/59,
Taman Sri Manja,
46000 Petaling Jaya,
Selangor, Malaysia.

+603-7783 2257

+603-7783 4316
+603-7783 4318

sales-kl@mobicon.com.my

Super Megohm Meters Selangor, Malaysia, Kuala Lumpur (KL), Petaling Jaya (PJ)

HIOKI SM7860 Power Source Unit Overview Power Source Unit Ideal for MLCC Leakage Current Measurement The SM7860 series allows for setting the dual-line output voltage on 8 channels or 16 channels, and enables up to 32-channel of output. The Hioki SM7860-5x/SM7860-6x series is a 32-channel, 500V / 1000V power source for the Hioki SM7810 Super Megohm Meter, providing positive and negative polarities required for MLCC test lines. Key Features • Support for multi-channel systems up to 32-channel output • 8-channels or 16-channels dual-line output voltage setting • Positive and negative polarities required for the MLCC test line included in a single unit • Output ON/OFF and current limitation can be performed for each channel • Support for the discharge of the charge capacitor • Output voltage of 1 kV is available • Large current output of 50 mA /channel allows for reducing the number of backup charges Output voltage of 1 kV is limited to 10 mA/channel	HIOKI SME-8320 Weight Electrode Overview Measure Surface Resistivity and Volume of Challenging Objects Easily Hioki Super Megohmmeters are high insulation resistance meters designed to measure the electrical resistance of insulation materials with high insulating properties. The SME-8320 is a plate sample surface resistance measurement electrode consisting of the main electrode, counter electrode, and positioning jig. This is an electrode for plate sample for use together with SME-8350 shield box. This electrode enables extremely easy measurement of surface resistivity and volume of sample with coarse surface such as carpets, etc. The main electrode dia. is 50mm, and the ring electrode inner-dia. and outer-dia. are 70mm and 80mm respectively.	HIOKI SME-8360 Electrode for Chip Capacitor Overview Measure the Resistivity of the Tips of Capacitors Effectively Hioki Super Megohmmeters are high insulation resistance meters designed to measure the electrical resistance of insulation materials with high insulating properties. The SME-8360 is an optional electrode device to use with Hioki super megohmmetersfor easily measuring capacitor tip resistance. For measuring the resistance of tip capacitors, with adjustable jig from 0mm to 11mm. When connected to the meter by an interlock cable, measurement voltage becomes “OFF” while the lid is open to ensure safety.	HIOKI SME-8301 Surface Resistance Measurement Electrode Overview Measure the Surface Resistance of Anti-Static Related Objects Hioki Super Megohmmeters are high insulation resistance meters designed to measure the electrical resistance of insulation materials with high insulating properties. The SME-8301 is an electrode that enables surface resistance measurement simply by pressing the electrode onto the sample, and is used in conjunction with the SM-8200 series. Surface resistance can be easily measured by simply pushing the electrode against the specimen. It measures surface resistance of anti-static related goods in combination of mainly Model SM-8213. Measure resistance up to 10^11 Ω.
HIOKI SR-2 Standard Resistor Overview 24-Point, 1,000VDC, 1 M to 10,000 MΩ Calibration Box for Super Megohmmeters Hioki Super Megohmmeters are high insulation resistance meters designed to measure the electrical resistance of insulation materials with high insulating properties. The SR-2 is for calibrating various types of super megohmmeters, consisting of 24 ultra-precision resistors encased in a sealed metal case. Each element can be connected on the terminal plate in various combinations as required. This is a resistor box for calibration of the super megohmmeters. Max. voltage is 1000 V DC and resistor value covers from 1 M to 10,000 MΩ in 24 points.	HIOKI SME-8311 Electrode For Flat Sample Overview Hioki Super Megohmmeters are high insulation resistance meters designed to measure the electrical resistance of insulation materials with high insulating properties. The SME-8311 is used for measuring the insulation resistance of flat samples in conjunction with the SM-8200 Series. Sample of 40~100mm square by up to 8mm in thickness is measurable. The main electrode dia. is 19.6mm and inner & outer dia. of ring electrode are 24.1mm & 28.8mm respectively. Measurement voltage becomes ''OFF'' while the lid is open to ensure safety. The fundamental specifications are the same as SME-8310.	HIOKI SME-8310 Plate Sample Electrode Overview Measure the Resistivity of Plate Samples Efficiently Hioki Super Megohmmeters are high insulation resistance meters designed to measure the electrical resistance of insulation materials with high insulating properties. The SME-8310 is an electrode for measuring the surface and volume resistance of flat samples in conjunction with the SM-8200 Series. Sample of 100mm square by up to 8mm in thickness is measurable. The main electrode dia. is 50mm and inner & outer dia. of ring electrode are 70mm & 80mm respectively. Measurement voltage becomes ''OFF'' while the lid is open to ensure safety. A selector switch allows selection of voltage or surface resistivity.	HIOKI SME-8330 Liquid Sample Electrode Overview Measure the Resistivity of Electrically Guarded Liquid Samples Hioki Super Megohmmeters are high insulation resistance meters designed to measure the electrical resistance of insulation materials with high insulating properties. The SME-8330 is used for measuring the insulation resistance or volume resistance of liquid samples, and consists of main and counter electrodes and a protection electrode or guard which removes leakage current through the insulator to sustain the electrodes. Electrode for liquid samples which is electrically guarded. Total volume is 25ml. Capacitance between main and counter electrode is approx. 45pF. Electrode constant is approx. 500cm. Distance between both electrodes is 1mm. Outer dia. is 36mm, height is approx. 140mm. Measure resistance up to 10^19Ω (at 1000V) when used together with Model SM-8216.
HIOKI SME-8350 Shielding Box Overview Shield Measurement Objects from Electromagnetic Influence Hioki Super Megohmmeters are high insulation resistance meters designed to measure the electrical resistance of insulation materials with high insulating properties. The SME-8350 is used to measure insulator surface resistance and volume resistance in combination with the SME-8320 Weight Electrode, and is particularly useful when high insulation resistance cannot be properly measured due to effects from noise and induction hum in the measuring environment. This is used as a sample accommodation box during measurement of a high-insulation resistance samples, or inductive or capacitive samples to perform electromagnetic shielding.	HIOKI SM9001 Surface/Volume Resistance Measurement Electrode Overview Measure the Surface and Volume Resistance of Test Objects without the Need to Cut Samples Hioki Super Megohmmeters are high insulation resistance meters designed to measure the electrical resistance of insulation materials with high insulating properties. The Hioki SM9001 is an optional electrode device to pair with the DSM-8104 or SM-8220 to meet applications ranging from evaluation of electrostatic countermeasures to high-resistance measurement in materials development and other fields. Key Features • Electrodes compliant with the JIS C 2170 and IEC 61340-2-3 standards • Measurement voltage up to 1,000 V, and measurement resistance up to 10^13 Ω • Surface and volume resistance of sheets and films can be measured just as they are without the need to cut samples • Measure the surface resistance of anti-static flooring and molded products	HIOKI SM-8213, SM8215, SM-8220 Super Megohm Meter Overview Super Megohm Measurement in Any Field The SM-8200 Digital Super Megohmmeter series are insulation resistance meters consisting of a constant voltage power supply and a high sensitivity current measuring element, and are designed to measure the electrical resistance of insulation materials with high insulating properties. Key Features • Ultra megohm measurement • Digital/analog display on LCD • Compatible for measurement of several sample types with electrodes & other devices	HIOKI SM7810 Super Ohm HiTester Overview 8-channel 1x10^2Ω to 1x10^15Ω Digital Super Megohmmeter for Testing MLCC Leakage Current The Hioki SM7810 is an 8-channel 1x10^2Ω to 1x10^15Ω insulation resistance tester for testing leak current on multi-layer ceramic capacitors (MLCC). Key Features • Test the leakage current of MLCCs at the fastest speed of 6.8ms simultaneously over 8 channels • Conduct high-speed leakage current testing of large-capacity MLCCs in the high current range (1mA) • Improve testing reliability using the contact check function • Build a flexible system by making best use of the individual settings of each channel
HIOKI SM7120 Super Megohm Meter Overview Rapid 6.4ms Super Megohm and Low Current Testing The Hioki SM Series Super Megohm Meters are high resistance and ultra low current inspection devices with a 0.1 fA resolution to offer precise testing on production lines. To accommodate vehicle components with increasingly high breakdown voltages, the SM7120 is the first insulation tester in the world to be able to output a measurement voltage of 2000 V. Key Features • 300 times better noise resistance • Max. 2000 V output : SM7120 • Max. 2 × 10^19 Ω display • Min. 0.1 fA resolution • Built-in EXT I/O, RS-232C, GP-IB and USB • Flexible, Multipurpose Design, High Resistance Meter/Electrometer/Picoammeter/IR Meter • Measure resistance of materials by combining with optional electrode	HIOKI SM7110 Super Megohm Meter Overview Rapid 6.4ms Super Megohm and Low Current Testing The Hioki SM Series Super Megohm Meters are high resistance and ultra low current inspection devices with a 0.1 fA resolution to offer precise testing on production lines. The SM7110 is designed for use in evaluating and testing the performance of electronic components used in products such as smartphones and hybrid vehicles, and supports measurement voltage output of up to 1000 V. Key Features • 300 times better noise resistance • Max. 1000 V output : SM7110 • Max. 2 × 10^19 Ω display • Min. 0.1 fA resolution • Built-in EXT I/O, RS-232C, GP-IB and USB • Flexible, Multipurpose Design, High Resistance Meter/Electrometer/Picoammeter/IR Meter • Measure resistance of materials by combining with optional electrode	HIOKI SM7420 Super Megohm Meter Overview 4ch micro current model - perfect for automated-systems integration The Hioki SM Series Super Megohm Meters are high resistance and ultra low current inspection devices with a 0.1 fA resolution to offer precise testing on production lines. The SM7420 is industry's fastest 4-channel simultaneous super megohm meter that supports applications for improving the productivity of passive components such as capacitors and filters. Key Features • 300 times better noise resistance • 6000 ps/minute - ideal for mass production • Channel-independent low capacity contact check • Perfect for equipping on automated machines • Max. 2 × 10^19 Ω display • Min. 0.1 fA resolution • Built-in EXT I/O, RS-232C, GP-IB and USB • Ideal for mounting in automated lines, easy to construct MLCC leakage current inspection lines

© 2019 - 2024 Mobicon - Remote Electronic Sdn Bhd (548591-V)
Visitors: 2906636
Powered by N.MY

Recent Updates