19, Jalan PJS 3/59,
Taman Sri Manja,
46000 Petaling Jaya,
Selangor, Malaysia.
+603-7783 2257
+603-7783 4316
+603-7783 4318
+603-7783 4318
KYORITSU KEW6201A Portable Appliance TestersProduct Details | KYORITSU KEW 6205 Portable Appliance TestersProduct Details Protect life and property from faulty appliances ・Battery operated ・PASS / FAIL result ・Color status back light ・10 mA & 30 mA RCD test(Isolation transformer built in) ¡¡Memory function up to 999 data ・Printer output ・Complies to AS / NZS 3760 | KYORITSU KEW 4140 LOOP/PFC/PSC TestersProduct Details • Anti-Trip Technology for complete trip free Loop testing on all RCDs rated 30mA and above. • Dual Display allows simultaneous measurements like Loop & PFC/PSC. • Two wire connection for Loop L-L, L-N and PSC testing is possible. • Phase rotation, Voltage and Frequency measurements. • Lock-down test button for 'hands free' testing with auto-start operation. • Display and front panel keyboards with Backlight to be visible in dark places. • Water and Dust proof (IP54) | KYORITSU 4118A LOOP/PFC/PSC TestersProduct Details • Custom microprocessor controlled for highest accuracy and reliability. • 3 LEDs for checking correct wiring status. • 15mA LOOP measurement: LOOP impedance 2000Ω range measurement is carried out with low test current (15mA). The current will not cause tripping out involved RCD even the one with the lowest nominal differential current (30mA). • Direct reading of Prospective Short Circuit Current (PSC). • Safe voltage measurement function. • Large custom digital display readout on all models. • Measure low loop resistances(resolution of 0.01Ω) • Automatic lock-out if test resister overheats. • Large custom digital display readout . • Visual indication of reversed phase and neutral wiring at socket. • Designed to IP54 Rating • Complies with IEC 61557 |
KYORITSU KEW 5410 RCD TestersProduct Details • Measurement of RCD trip time Conducting testing of rated residual non-operating currents at × 1/2 Range, measuring RCD trip time at × 1 and × 5 Ranges. • Measurement of trip out current Measuring trip out current by varying current automatically. • Remote Test Enabling a user to hold the Test Leads with his both hands by locking the Test Button. Measurement will automatically start when the main voltage is detected. • Voltage Measurement Carrying out a constant measurement of voltage in the stand-by mode at each Range. • Auto-detection of Contact voltage Detecting the voltage to earth of Earth electrodes or Protective conductors during RCD test - when applying test currents - at measurement using EARTH in order to prevent electrical shocks caused by the damaged earth. Measurement will be ceased at AC50V or more. • Dust- and Water-proof Dust- and Water-proof construction (designed to IEC 60529 IP54). • Backlight Facilitating working at dimly illuminated locations. | KYORITSU 5406A RCD TestersProduct Details • Custom microprocessor controlled for highest accuracy and reliability. • 3 LEDs for checking correct wiring status. • 0 and 180 degree phase angle switch permits quick tests and consistent readings. • Digital read-out of tripping time. • Constant current source circuitry ensures that a fluctuating mains voltage does not affect the accuracy of readings. • Large custom digital display readout. • Visual indication of reversed phase and neutral wiring at socket. • Designed to IP54 Rating. • Complies with IEC 61557 • Test of a large kind of RCD's: Standard, Selective, AC and A (DC sensitive breakers) |