Supplier, Suppliers, Supply, Supplies Current Probe, Sensor HIOKI ~ Mobicon - Remote Electronic Sdn Bhd

Visit
Official Website

Mobicon - Remote Electronic Sdn Bhd
19, Jalan PJS 3/59,
Taman Sri Manja,
46000 Petaling Jaya,
Selangor, Malaysia.

+603-7783 2257

+603-7783 4316
+603-7783 4318

sales-kl@mobicon.com.my

Current Probe, Sensor Selangor, Malaysia, Kuala Lumpur (KL), Petaling Jaya (PJ)

1 - 24 of 54 \|<1 2 3 >\|
HIOKI CT6500 Clamp on sensor CLAMP ON SENSOR CT6500 Overview • 40 Hz to 1 kHz bandwidth • Primary: 500 A AC • Secondary: 1mV AC/A • Max. input of 600 A AC • φ46 mm (1.81 in) dia.	HIOKI L9217 Connection Cord (BNC-BNC) Overview Cord has insulated BNC connectors at both ends, 1.6 m (5.25 ft) length	HIOKI CT9901 Conversion Cable Overview ME15W (12 pin) to PL23 (10 pin) connector	HIOKI CT9900 Conversion Cable Overview Convert PL23 (10-pin) terminal to ME15W (12-pin) terminal
HIOKI CT9904 Connection Cable Overview ME15W (12 pin) terminal to ME15W (12 pin) terminal, 1 m (3.28 ft) length (for connecting CT9557 total output to PW6001 or PW3390 only)	HIOKI CT9557 Sensor Unit Overview Hioki pass-through current sensors and clamp on current probes are best-in-class current sensing devices for use with power meters, Memory HiCorders and high performance oscilloscopes. The CT9557 is 4-channel sensor unit and power adapter for any of the CT686x series, 9709 and CT684x series current sensors and probes that provides waveform and RMS output. Key Features • Power supply for high-precision current sensors with waveform output functionality • Output a single waveform from an aggregate of input waveforms	HIOKI 3272 Power Supply Power Supply Unit for Outputting Current Probe Signals to Memory HiCorders and Oscilloscopes Overview Hioki flat bandwidth current probes are best-in-class current sensors for use with Memory HiCorders and high performance oscilloscopes. The 3272 is a single channel power supply for outputting signals measured by the 3270 Series AC/DC Clamp On Probe to the data acquisition equipment. Key Features • Power supply for the Clamp on probe 3273-50 - 3276, CT6700 series • Supplies power when connected to a general-purpose instrument such as a recorder	HIOKI 9010-50 Clamp On Probe Simply Connect to a Tester or Recorder to Easily Measure Large Currents Overview Hioki current sensors are best-in-class devices for accurately capturing a wide range of current levels. The 9010-50 is a multi-range 500A AC voltage output clamp sensor for capturing waveforms with DMMs. Measure AC current on live power lines without needing to cut the wire. CAT III 600 V Key Features • Economical clamp sensors for waveform recording with Memory HiCorders • Choose from up to six general-purpose ranges
HIOKI 9018-50 Clamp On Probe Simply Connect to a Tester or Recorder to Easily Measure Large Currents Overview Hioki current sensors are best-in-class devices for accurately capturing a wide range of current levels. The 9018-50 is a multi-range 500A AC voltage output clamp sensor with superior phase characteristics for capturing waveforms with DMMs and Memory HiCorders. Measure AC current on live power lines without needing to cut the wire. Key Features • Choose from six general-purpose ranges • Accurately record and analyze waveforms and harmonic signals	HIOKI 9132-50 Clamp On Probe Simply Connect to a Tester or Recorder to Easily Measure Large Currents Overview Hioki current sensors are best-in-class devices for accurately capturing a wide range of current levels. The 9132-50 is a multi-range 1000A AC voltage output clamp sensor for capturing waveforms with DMMs and Memory HiCorders. Measure AC current on live power lines without needing to cut the wire. CAT III 600 V Key Features • Economical clamp sensor for waveform recording with Memory HiCorders • Choose from up to six general-purpose ranges	HIOKI 9695-02 Clamp On Sensor For measuring load current, voltage output sensor 50 A AC Overview Hioki current sensors are best-in-class devices for use with power meters, and PQAs. The 9695-02 is a 50A AC clamp sensor with voltage output for measuring load current. CAT III 300V For power meters and power loggers (may require the 9219) Key Features • High ±0.3% accuracy • For inverter devices or commercial power lines • Fits in narrow spaces due to compact design	HIOKI 9695-03 Clamp On Sensor For measuring load current, voltage output sensor 100 A AC Overview Hioki current sensors are best-in-class devices for use with power meters, and PQAs. The 9695-03 is a 100A AC clamp sensor with voltage output for measuring load current. CAT III 300V For power meters and power loggers (may require the 9219) Key Features • High ±0.3% accuracy • For inverter devices or commercial power lines • Fits in narrow spaces due to compact design
HIOKI 9657-10 Clamp On Leak Sensor Voltage Output Sensor for Leak Current Measurements Overview Hioki current sensors are best-in-class devices for accurately capturing a wide range of current levels. The 9657-10 is a voltage output clamp sensor for measuring leak current. The high-permeability magnetic material of the sensor’s core and magnetic shield enables high-precision measurement of very weak currents. Key Features • For general purpose leak current testing • Also supports load current testing • Check for insulation faults	HIOKI 9675 Clamp On Leak Sensor Voltage Output Sensor for Leak Current Measurements Overview Hioki current sensors are best-in-class devices for accurately capturing a wide range of current levels. The 9675 is a voltage output clamp sensor for measuring leak current. The high-permeability magnetic material of the sensor’s core and magnetic shield enables high-precision measurement of very weak currents. Key Features • High ±1.0% accuracy • Leak current testing of ground conductors • Check for insulation faults	HIOKI CT9667 AC Flexible Current Sensor Easy to Loop Around, Even in Confined Spaces Overview Hioki current sensors are best-in-class devices for use with power meters, PQAs and Memory HiCorders. The CT9667 series are flexible Rogowski type AC sensors comprising of 3 different models in various loop diameter sizes from 100 to 254 mm. The 100mm and 180mm diameter sensor also feature extra thin cables for easier looping around complicated wiring. All 3 sensors 500A/5000A ranges, making them ideal for measuring large load current. CAT IV 600 V, CAT III 1000 V Key Features • Thinner cables are easy to use in confined spaces and with complicated wiring (-01, -02) • Shaped so that it’s easy to route through complex wiring • Easily supports large current measurements up to 5000 A • Wide 10 Hz to 20 kHz band with excellent frequency characteristics • Choose from three conductor diameter sizes • Combine with Hioki power meters or Memory HiCorders (with BNC input terminals)	HIOKI CT7040 Series AC Flexible Current Sensor Flexible 600A/6000A AC Current Sensors in 3 Sizes Overview Hioki clamp sensors are best-in-class measuring devices incorporating Hioki’s expertise in current sensing technology. The CT7040 Series compromise of 600A/6000A AC flexible current sensors in three different loop sizes that pair with the detachable Display Unit to measure large currents in crowded wiring and confined spaces. CAT IV 600 V, CAT III 1000 V Key Features • Thinner cables are easier to use in confined spaces and with complicated wiring • Supports large current measurements up to 6000 A • Wide 10 Hz to 50 kHz band with excellent frequency characteristics • Choose from three conductor diameter sizes • Ideal for site inspections by using detachable Display Unit • Four output formats to output data to loggers or other devices (via Display Unit): WAVE, RMS, PEAK, Hz
HIOKI 9272-05 Clamp On Sensor Ideal for Measuring AC Current with Low Frequencies such as Inverter Control Devices Overview Hioki current sensors are best-in-class devices for use with power meters, Memory HiCorders and high performance oscilloscopes. The 9272-10/9272-05 are a 1Hz to 100 kHz AC current sensor ideal for measuring low frequency equipment such as inverters. CAT III 600V Key Features • Superior low frequency and phase characteristics suitable for testing the current and power of inverter control devices • Wide 1 Hz to 100 kHz frequency bandwidth perfect for harmonic analysis, FFT analysis and waveform monitoring (AC only)	HIOKI CM7290 Display Unit Multi-functional Receiving/Display Unit to Use Right on the Field or Output to Advanced Recorder or Logger Overview Hioki clamp on meters are best-in-class measuring devices incorporating Hioki’s expertise in current sensing technology. The CM7290 is the display and output unit for the CT7600 and CT7700 AC/DC Current Sensor series, creating a standalone clamp meter for field use or enabling waveform signals to be output to a Hioki memory recorder or logger for further analysis. Key Features • Power supply and signal output for Current Sensor CT7000 series • Simultaneous dual display of the measured values, frequency, and output rate • Four output formats to output data to loggers or other devices (via Display Unit) • Supports AC adapter, AA alkaline batteries, and external power supply	HIOKI CT7636 AC/DC Current Sensor Accurate, Long-term Recording and Easy Output Settings Overview Hioki clamp on meters are best-in-class measuring devices incorporating Hioki’s expertise in current sensing technology. The CT7636 is a 600 A AC/DC Current Sensor that pairs with the detachable Display Unit CM7290 or CM7291 to capture instantaneous waveforms that can be output to a Hioki memory recorder or logger for further analysis. CAT IV 600 V Key Features • Ideal for observing instantaneous waveforms in laboratories and other temperature-controlled environments • Ideal for site inspections by using detachable Display Unit • Four output formats to output data to loggers or other devices (via Display Unit): WAVE, RMS, PEAK, Hz	HIOKI CT7642 AC/DC Current Sensor Accurate, Long-term Recording and Easy Output Settings Overview Hioki clamp on meters are best-in-class measuring devices incorporating Hioki’s expertise in current sensing technology. The CT7642 is a 2000 A AC/DC Current Sensor that pairs with the detachable Display Unit CM7290 or CM7291 to capture instantaneous waveforms that can be output to a Hioki memory recorder or logger for further analysis. CAT IV 600 V Key Features • Ideal for observing instantaneous waveforms in laboratories and other temperature-controlled environments • Ideal for site inspections by using detachable Display Unit • Four output formats to output data to loggers or other devices (via Display Unit): WAVE, RMS, PEAK, Hz
HIOKI CT7731 AC/DC Auto-zero Current Sensor Accurate, Long-term Recording and Easy Output Settings Overview Hioki clamp on meters are best-in-class measuring devices incorporating Hioki’s expertise in current sensing technology. The CT7731 is a 100 A AC/DC Current Sensor that pairs with the detachable Display Unit CM7290 or CM7291 for convenient field testing, while delivering an extended temperature range and auto-zero adjustment to minimize drift due to wide temperature changes that occur during long-term testing. Further extend the functionality of this system by connecting the Display Unit with a Hioki memory recorder or logger. CAT IV 600 V Key Features • Accurately measure and record even when the temperature changes • Ideal for site inspections by using detachable Display Unit • Four output formats to output data to loggers or other devices (via Display Unit): WAVE, RMS, PEAK, Hz	HIOKI CT7736 AC/DC Auto-zero Current Sensor Accurate, Long-term Recording and Easy Output Settings Overview Hioki clamp on meters are best-in-class measuring devices incorporating Hioki’s expertise in current sensing technology. The CT7736 is a 600 A AC/DC Current Sensor that pairs with the detachable Display Unit CM7290 or CM7291 for convenient field testing, while delivering an extended temperature range and auto-zero adjustment to minimize drift due to wide temperature changes that occur during long-term testing. Further extend the functionality of this system by connecting the Display Unit with a Hioki memory recorder or logger. CAT IV 600 V Key Features • Accurately measure and record even when the temperature changes • Ideal for site inspections by using detachable Display Unit • Four output formats to output data to loggers or other devices (via Display Unit): WAVE, RMS, PEAK, Hz	HIOKI CT7742 AC/DC Auto-zero current sensor Accurate, Long-term Recording and Easy Output Settings Overview Hioki clamp on meters are best-in-class measuring devices incorporating Hioki’s expertise in current sensing technology. The CT7742 is a 2000 A AC/DC Current Sensor that pairs with the detachable Display Unit CM7290 for convenient field testing, while delivering an extended temperature range and auto-zero adjustment to minimize drift due to wide temperature changes that occur during long-term testing. Further extend the functionality of this system by connecting the Display Unit with a Hioki memory recorder or logger. CAT IV 600 V Key Features • Accurately measure and record even when the temperature changes • Ideal for site inspections by using detachable Display Unit • Four output formats to output data to loggers or other devices (via Display Unit): WAVE, RMS, PEAK, Hz	HIOKI CT7631 AC/DC Current Sensor Accurate, Long-term Recording and Easy Output Settings Overview Hioki clamp on meters are best-in-class measuring devices incorporating Hioki’s expertise in current sensing technology. The CT7631 is a 100 A AC/DC Current Sensor that pairs with the detachable Display Unit CM7290 or CM7291 to capture instantaneous waveforms that can be output to a Hioki memory recorder or logger for further analysis. Mix and match with other sensors in the series for a cost-effective solution covering a broad measurement range. CAT IV 600 V Key Features • Ideal for observing instantaneous waveforms in laboratories and other temperature-controlled environments • Ideal for site inspections by using detachable Display Unit • Four output formats to output data to loggers or other devices (via Display Unit): WAVE, RMS, PEAK, Hz
1 - 24 of 54 \|<1 2 3 >\|

© 2019 - 2024 Mobicon - Remote Electronic Sdn Bhd (548591-V)
Visitors: 2907075
Powered by N.MY

Recent Updates