Overview

The EL-SMS-2G-TP+ is a battery powered temperature alert that will send SMS (Short Message Service) notification messages to pre-programmed mobile phone numbers whenever the temperature it is monitoring exceeds an upper or lower temperature limit.

Configured using the EasyLog SMS App on Google Play and the App Store, the EL-SMS-2G-TP+ can also send periodic summary messages to confirm that it is running normally including the minimum, maximum and average temperature since the previous summary message.

The unit must be fitted with a microSIM card purchased separately to allow it to register onto a 2G GSM network.

Overview

Overview

 This high accuracy temperature and humidity smart probe has a 2m cable and is useful in applications where monitoring of ambient air temperature and humidity is required. For use with EL-GFX-D2 model type. 

Overview

Overview

The Wireless Alert DC monitors whether a door is open or closed using a two-part door contact sensor on a 350mm cable. The device body can be secured in position using an adhesive pad (supplied). Both parts of the door contact sensor can also be secured in place using adhesive pads (supplied), or screws (supplied).

The device can be set to trigger a notification email, sent to a user-selected address, if the monitored door opens, closes, or both.

The user can also configure delays (between 1 minute and 12 hours) before an alert is sent. In addition to this, the device can send a scheduled summary email detailing the number of alert events, percentage of open and closed time, and battery level.

Overview

The Wireless Alert TH can be set up to monitor temperature and humidity in a variety of applications.

High and low limits are user-configurable between -18 and 54 °C (0 to 129 °F), and 10 to 90% RH. The device will trigger a notification email, sent to a user-selected address, if the selected limits are breached and when the temperature or humidity returns to normal.

In addition to this, the device can send a scheduled summary email detailing minimum, maximum and average temperature and humidity, as well as battery level, number of alerts, and total time spent in alert.

Overview

The Wireless Alert T can be set up to monitor temperature limits in a variety of applications.

High and low temperature limits are user-configurable between -18 and 54 °C (0 and 129 °F). The device will trigger a notification email, sent to a user-selected address, if the temperature limits are breached and when the temperature returns to normal.

In addition to this, the device can send a scheduled summary email detailing minimum, maximum and average temperature, as well as battery level, number of alerts, and total time spent in alert.

Overview

The EL-WiFi-TPX+ remotely monitors the environment over a -40 to +125°C (-40 to +257°­­F) measurement range, and comes equipped with an alarm warning light and sounder to make sure you never miss a temperature breach. Data is uploaded periodically using a standard WiFi network to the EasyLog Cloud.

EasyLog Cloud gives access to each data logger, and data collected from any internet-enabled device. Change data logger settings remotely, receive email alerts of alarm conditions, link sensors from multiple sites into one account, and assign multiple user privileges.

The device stores data internally if it loses WiFi connection and automatically uploads it to the Cloud once reconnected.

Use the EasyLog Cloud Apps for Android and Apple to easily set up your device and access your data anytime, anywhere.

A high accuracy thermistor temperature probe (which can be removed and calibrated separately) and a wall mounting bracket are included with the product.

Overview

Overview

This panel mounted IP67 / NEMA 4X rated bezel is compatible with the DPM 742-BL, DPM 750S-BL and DPM 750S-EB-W and offers an IP67 / NEMA 4X rating from the front.

The screw fixings allow for a quick and easy assembly of the module and bezel in the panel. A robust and attractive alloy construction gives the product a professional finish. BEZ 700-IP is ideally suited for applications where the ingress of moisture or particles poses a problem. 

Overview

Overview

Overview

Overview

SGD 70-A is a 7” capacitive touch display designed for use with PanelPilotACE Design Studio, a free drag-and-drop style software package for rapid development of advanced user interfaces and panel meters.  This off the shelf display features a wealth of hardware interfaces, including four 16-bit bipolar analogue inputs (to a maximum of ±40V d.c.), eight digital input/output pins, two alarm outputs, four 8-bit PWM outputs, PID Control, Ethernet FTP for logged data, multi-channel data logging and trend graphs, serial RS232 and RS485 and an additional add on board to measure temperature.

Development Kit

The development kit, SGD 70-A-DK+, is the best choice if you are starting to develop on the PanelPilotACE platform.  It includes all you need to begin:  an SGD 70-A, a development board and a USB cable.  The board provides switches, dials, LEDs and screw terminal connections for all the input and output functionality of the SGD 70-A.

PanelPilotACE University

The PanelPilotACE University has a multitude of resources to make your programming experience as quick and efficient as possible.  From How-To Guides and Frequently Asked Questions to an ever-growing number of pre-configured ACE Templates and an Icon and Graphic Library, visit the University and make your PanelPilotACE project even quicker.

Overview

Overview

Overview

Overview

Overview

Overview

Overview

Overview

This large panel meter features a 3½ digit LCD with 19mm (0.75'') white digits on a black background. With 200mV d.c. full scale reading, auto-zero and auto-polarity, this meter plugs directly into a 16-way IDC socket and can be fitted into a panel via the bezel, window and clips provided. The DPM 950S-EB-W is a low cost, popular part, normally stocked in high quantity and suitable for new designs.

Overview

Overview

This panel meter features a 3½ digit LED display with 11mm (0.43'') digit height. With 200mV d.c. full scale reading, auto-zero and auto-polarity, this meter plugs directly into two 5-way sockets and can be fitted into a panel via the bezel, window and clips provided. The DPM 40 is a low cost, popular part, normally stocked in high quantity and suitable for new designs.