Supplier, Suppliers, Supply, Supplies Wireless COMET ~ Mobicon - Remote Electronic Sdn Bhd

Visit
Official Website

Mobicon - Remote Electronic Sdn Bhd
19, Jalan PJS 3/59,
Taman Sri Manja,
46000 Petaling Jaya,
Selangor, Malaysia.

+603-7783 2257

+603-7783 4316
+603-7783 4318

sales-kl@mobicon.com.my

Wireless Selangor, Malaysia, Kuala Lumpur (KL), Petaling Jaya (PJ)

1 - 24 of 26 \|<1 2 >\|
COMET U3121 Temperature and humidity data logger for external probe Product Details Data logger is designed to record temperature and humidity from external probe. The recording is performed in a non-volatile electronic memory. The data can be transferred to a PC via USB-C. In case of exceeded set limits alarms are indicated by LED, LCD and acoustically by built-in beeper. The temperature and humidity probe is not included in delivery, probe of the appropriate length and design you can choose in optional accessories. The device includes Traceable calibration certificate with declared metrological traceability of etalons is based on requirements of EN ISO/IEC 17025 standard. Code U3121 Warranty 3 years TECHNICAL DATA MEASURED VALUE Temperature Relative humidity Counted values (dew point…) TEMPERATURE SENSOR Measuring range according to the connected probe Digi/E Accuracy according to the connected probe Digi/E Resolution 0.1 °C Response time t90 of temperature measurement (temperature step 20°C, air flow approximately 1m/s) 8 min HUMIDITY SENSOR Measuring range according to the connected probe Digi/E Accuracy according to the connected probe Digi/E Resolution 0.1% RH DEW POINT Measuring range according to the connected probe Digi/E Accuracy according to the connected probe Digi/E Resolution 0.1 °C GENERAL TECHNICAL DATA Operating temperature -20 to +60 °C Channels 1x connectable temperature+humidity probe Memory 500,000 values in noncyclic logging mode; 350,000 values in cyclic record mode Recording interval adjustable from 1 s to 24 h Display and alarm refresh adjustable 1 s, 10 s, 1 min Recording mode noncyclic - data logging stops after filling the memory cyclic - after filling memory oldest data is overwritten by new Real time clock year, leap year, month, day, hour, minute, second Power Lithium battery 3.6 V, size AA Protection class IP67 Dimensions 61 x 93 x 32 mm Weight (including batteries) approx. 120 g Warranty 3 years	COMET U4440Msim IoT Wireless Temperature, Relative Humidity, CO2 and atmospheric pressure Datalogger Product Details IoT Wireless Datalogger kit with built-in GSM modem and Flat Rate SIM Card allows the instant connection to the COMET Cloud. IoT Datalogger is designed to record temperature, humidity, atmospheric pressure and CO2 from built-in sensors. In case of exceeded set limits e-mail is sent from the COMET Cloud. Alarms are also indicated locally by LED, LCD and acoustically by built-in beeper. The recording is performed in a non-volatile electronic memory. The data can be transferred to a PC via included USB-C cable. GSM recorder includes Traceable calibration certificate with declared metrological traceability of etalons is based on requirements of EN ISO/IEC 17025 standard. Code U4440Msim Warranty 3 years TECHNICAL DATA MEASURED VALUE Temperature Relative humidity Counted values (dew point…) CO2 Atmospheric pressure TEMPERATURE SENSOR Measuring range -20 to +60 °C Accuracy ±0.4 °C Resolution 0.1 °C HUMIDITY SENSOR Measuring range 0 to 100 % RH Accuracy ± 1.8 % RH Resolution 0.1% RH DEW POINT Measuring range -90 to +60 °C Accuracy ±1.5 °C at ambient temperature T <25 °C and RH >30 % Resolution 0.1 °C CO2 SENSOR Measuring range 0 to 5000 ppm Accuracy ±(50ppm +3% from reading) at 25°C and 1013hPa Resolution 1 ppm ATMOSPHERIC PRESSURE SENSOR SENSOR Measuring range 600 to 1100 hPa Accuracy ±1.3 hPa at 23 °C from 800 to 1100 hPa Resolution 0.1 hPa GENERAL TECHNICAL DATA Operating temperature -20 to +60 °C Channels internal sensor for temperature, humidity, CO2 and atmospheric pressure Memory 500,000 values in noncyclic logging mode; 350,000 values in cyclic record mode Recording interval adjustable from 1 s to 24 h Display and alarm refresh adjustable 1 s, 10 s, 1 min Recording mode noncyclic - data logging stops after filling the memory cyclic - after filling memory oldest data is overwritten by new Real time clock year, leap year, month, day, hour, minute, second Power battery SONY LiIon 5200mAh Protection class IP20 Dimensions 61 x 93 x 53 mm, with antenna 120 x 93 x 53 mm Weight (including batteries) approx. 250 g Warranty 3 years	COMET U4440M IoT Wireless Temperature, Relative Humidity, CO2 and atmospheric pressure Datalogger wi Product Details GSM datalogger is designed to record temperature, humidity, atmospheric pressure and CO2. In case of exceeded set limits, SMS and JSON messages can be sent via GPRS data connection. Measured values can be sent to the internet storage COMET Cloud, which is a complete monitoring, alarm and analysis system. It is also possible to set the regular sending of JSON messages to COMET Database, the sending interval is adjustable. Alarms are also indicated locally by LED, LCD and acoustically by built-in beeper. The recording is performed in a non-volatile electronic memory. The data can be transferred to a PC via included USB-C cable. GSM recorder includes Traceable calibration certificate with declared metrological traceability of etalons is based on requirements of EN ISO/IEC 17025 standard. Code U4440M Warranty 3 years TECHNICAL DATA MEASURED VALUE Temperature Relative humidity Counted values (dew point…) CO2 Atmospheric pressure TEMPERATURE SENSOR Measuring range -20 to +60 °C Accuracy ±0.4 °C Resolution 0.1 °C HUMIDITY SENSOR Measuring range 0 to 100 % RH Accuracy ± 1.8 % RH Resolution 0.1% RH DEW POINT Measuring range -90 to +60 °C Accuracy ±1.5 °C at ambient temperature T <25 °C and RH >30 % Resolution 0.1 °C CO2 SENSOR Measuring range 0 to 5000 ppm Accuracy ±(50ppm +3% from reading) at 25°C and 1013hPa Resolution 1 ppm ATMOSPHERIC PRESSURE SENSOR SENSOR Measuring range 600 to 1100 hPa Accuracy ±1.3 hPa at 23 °C from 800 to 1100 hPa Resolution 0.1 hPa GENERAL TECHNICAL DATA Operating temperature -20 to +60 °C Channels internal sensor for temperature, humidity, CO2 and atmospheric pressure Memory 500,000 values in noncyclic logging mode; 350,000 values in cyclic record mode Recording interval adjustable from 1 s to 24 h Display and alarm refresh adjustable 1 s, 10 s, 1 min Recording mode noncyclic - data logging stops after filling the memory cyclic - after filling memory oldest data is overwritten by new Real time clock year, leap year, month, day, hour, minute, second Power battery SONY LiIon 5200mAh Protection class IP20 Dimensions 61 x 93 x 53 mm, with antenna 120 x 93 x 53 mm Weight (including batteries) approx. 250 g Warranty 3 years	COMET U0110Msim IoT Wireless Temperature Datalogger, with built-in sensor, GSM modem and Flat Rate S Product Details IoT Wireless Datalogger kit with built-in GSM modem and Flat Rate SIM Card allows the instant connection to the COMET Cloud. Measured values can be sent to the internet storage COMET Cloud, which is a complete monitoring, alarm and analysis system. IoT Datalogger is designed to record temperature from built-in sensor. In case of exceeded set limits e-mail is sent from the COMET Cloud. Alarms are also indicated locally by LED, LCD and acoustically by built-in beeper. The recording is performed in a non-volatile electronic memory. The data can be transferred to a PC via included USB-C cable. GSM recorder includes Traceable calibration certificate with declared metrological traceability of etalons is based on requirements of EN ISO/IEC 17025 standard. Code U0110Msim Warranty 3 years TECHNICAL DATA MEASURED VALUE Temperature TEMPERATURE SENSOR Measuring range -20 to +60 °C Accuracy ±0.4 °C Resolution 0.1 °C Response time t90 of temperature measurement (temperature step 20°C, air flow approximately 1m/s) 15 min GENERAL TECHNICAL DATA Operating temperature -20 to +60 °C Channels internal temperature sensor Memory 500,000 values in noncyclic logging mode; 350,000 values in cyclic record mode Recording interval adjustable from 1 s to 24 h Display and alarm refresh adjustable 1 s, 10 s, 1 min Recording mode noncyclic - data logging stops after filling the memory cyclic - after filling memory oldest data is overwritten by new Real time clock year, leap year, month, day, hour, minute, second Power battery SONY LiIon 5200mAh Protection class IP67 Dimensions 61 x 93 x 53 mm, with antenna 120 x 93 x 53 mm Weight (including batteries) approx. 260 g Warranty 3 years
COMET U0110M IoT Wireless Temperature Datalogger with built-in sensor and GSM modem Product Details GSM datalogger is designed to record temperature. In case of exceeded set limits, SMS and JSON messages can be sent via GPRS data connection. Measured values can be sent to the internet storage COMET Cloud, which is a complete monitoring, alarm and analysis system. It is also possible to set the regular sending of JSON messages to COMET Database, the sending interval is adjustable. Alarms are also indicated locally by LED, LCD and acoustically by built-in beeper. The recording is performed in a non-volatile electronic memory. The data can be transferred to a PC via included USB-C cable. GSM recorder includes Traceable calibration certificate with declared metrological traceability of etalons is based on requirements of EN ISO/IEC 17025 standard. Code U0110M Warranty 3 Years TECHNICAL DATA MEASURED VALUE Temperature TEMPERATURE SENSOR Measuring Range -20 To +60 °C Accuracy ±0.4 °C Resolution 0.1 °C Response Time T90 Of Temperature Measurement (Temperature Step 20°C, Air Flow Approximately 1m/S) 15 Min GENERAL TECHNICAL DATA Operating Temperature -20 To +60 °C Channels Internal Temperature Sensor Memory 500,000 Values In Noncyclic Logging Mode; 350,000 Values In Cyclic Record Mode Recording Interval Adjustable From 1 S To 24 H Display And Alarm Refresh Adjustable 1 S, 10 S, 1 Min Recording Mode Noncyclic - Data Logging Stops After Filling The Memory Cyclic - After Filling Memory Oldest Data Is Overwritten By New Real Time Clock Year, Leap Year, Month, Day, Hour, Minute, Second Power Battery SONY LiIon 5200mAh Protection Class IP67 Dimensions 61 X 93 X 53 Mm, With Antenna 120 X 93 X 53 Mm Weight (Including Batteries) Approx. 260 G Warranty 3 Years	COMET U0141Msim IoT Wireless Temperature Datalogger for 4 external probes, with built-in GSM modem a Product Details IoT Wireless Datalogger kit with built-in GSM modem and Flat Rate SIM Card allows the instant connection to the COMET Cloud. IoT Datalogger is designed to record temperature from up to 4 external sensors. In case of exceeded set limits e-mail is sent, SMS and JSON messages can be sent via GPRS data connection. Alarms are also indicated locally by LED, LCD and acoustically by built-in beeper. The recording is performed in a non-volatile electronic memory. The data can be transferred to a PC via included USB-C cable. GSM recorder includes Traceable calibration certificate with declared metrological traceability of etalons is based on requirements of EN ISO/IEC 17025 standard. Code U0141Msim Warranty 3 years TECHNICAL DATA MEASURED VALUE Temperature TEMPERATURE SENSOR - EXTERNAL PROBE PT1000 Measuring range -200 to +260 °C Accuracy ±0.2°C; ±0.2 % of the measurement value in a range of +100 to +260 °C Resolution 0.1 °C Response time t90 of temperature measurement (temperature step 20°C, air flow approximately 1m/s) according to the connected probe GENERAL TECHNICAL DATA Operating temperature -20 to +60 °C Channels 4x external temperature probe Memory 500,000 values in noncyclic logging mode; 350,000 values in cyclic record mode Recording interval adjustable from 1 s to 24 h Display and alarm refresh adjustable 1 s, 10 s, 1 min Recording mode noncyclic - data logging stops after filling the memory cyclic - after filling memory oldest data is overwritten by new Real time clock year, leap year, month, day, hour, minute, second Power battery SONY LiIon 5200mAh Protection class IP67 Dimensions 61 x 93 x 53 mm, with antenna 120 x 93 x 53 mm Weight (including batteries) approx. 270 g Warranty 3 years	COMET U0141M IoT Wireless Temperature Datalogger for 4 external probes, with built-in GSM modem Product Details GSM Datalogger is designed to record temperature from four external Pt1000 probes. In case of exceeded set limits, SMS and JSON messages can be sent via GPRS data connection. Measured values can be sent to the internet storage COMET Cloud, which is a complete monitoring, alarm and analysis system. It is also possible to set the regular sending of JSON messages to COMET Database, the sending interval is adjustable. Alarms are also indicated locally by LED, LCD and acoustically by built-in beeper. The recording is performed in a non-volatile electronic memory. The data can be transferred to a PC via included USB-C cable. The device includes Traceable calibration certificate with declared metrological traceability of etalons is based on requirements of EN ISO/IEC 17025 standard. Code U0141M Warranty 3 years TECHNICAL DATA MEASURED VALUE Temperature TEMPERATURE SENSOR - EXTERNAL PROBE PT1000 Measuring range -200 to +260 °C Accuracy ±0.2°C; ±0.2 % of the measurement value in a range of +100 to +260 °C Resolution 0.1 °C Response time t90 of temperature measurement (temperature step 20°C, air flow approximately 1m/s) according to the connected probe GENERAL TECHNICAL DATA Operating temperature -20 to +60 °C Channels 4x external temperature probe Memory 500,000 values in noncyclic logging mode; 350,000 values in cyclic record mode Recording interval adjustable from 1 s to 24 h Display and alarm refresh adjustable 1 s, 10 s, 1 min Recording mode noncyclic - data logging stops after filling the memory cyclic - after filling memory oldest data is overwritten by new Real time clock year, leap year, month, day, hour, minute, second Power battery SONY LiIon 5200mAh Protection class IP67 Dimensions 61 x 93 x 53 mm, with antenna 120 x 93 x 53 mm Weight (including batteries) approx. 270 g Warranty 3 years	COMET U0843Msim IoT Wireless Temperature Datalogger for 2 external probes, with two two-state inputs Product Details IoT Wireless Datalogger kit with built-in GSM modem and Flat Rate SIM Card allows the instant connection to the COMET Cloud. GSM Datalogger is designed to record from two external temperature probes and two two-state inputs. In case of exceeded set limits e-mail is sent from the COMET Cloud. Alarms are also indicated locally by LED, LCD and acoustically by built-in beeper. The recording is performed in a non-volatile electronic memory. The data can be transferred to a PC via included USB-C cable. GSM recorder includes Traceable calibration certificate with declared metrological traceability of etalons is based on requirements of EN ISO/IEC 17025 standard. Code U0843Msim Warranty 3 years TECHNICAL DATA MEASURED VALUE Temperature Two-state signal TEMPERATURE SENSOR - EXTERNAL PROBE PT1000 Measuring range -200 to +260 °C Accuracy ±0.2°C; ±0,2 % of the measurement value in a range of +100 to +260 °C Resolution 0.1 °C Response time t90 of temperature measurement (temperature step 20°C, air flow approximately 1m/s) according to the connected probe BINARY INPUT Parameters of the voltage contact „L“ level input voltage:< 0,4 V(*); „H“ level input voltage:> 2 V; Minimum voltage applicable:0 V; Maximum voltage applicable:+30 V DC Parameters of the voltage-free contact Contact resistance in „switched-on“ state:< 10 kOhm; Contact resistance in the „switched-off“ state:> 300 kOhm; Contact voltage in the „switched-off“ state:ca 3 V; Minimum state duration necessary for latching the state:1s GENERAL TECHNICAL DATA Operating temperature -20 to +60 °C Channels 2x external temperature probe, 2x binary input Memory 500,000 values in noncyclic logging mode; 350,000 values in cyclic record mode Recording interval adjustable from 1 s to 24 h Display and alarm refresh adjustable 1 s, 10 s, 1 min Recording mode noncyclic - data logging stops after filling the memory cyclic - after filling memory oldest data is overwritten by new Real time clock year, leap year, month, day, hour, minute, second Power battery SONY LiIon 5200mAh Protection class IP20 Dimensions 61 x 93 x 53 mm, with antenna 120 x 93 x 53 mm Weight (including batteries) approx. 270 g Warranty 3 years
COMET U0843M IoT Wireless Temperature Datalogger for 2 external probes, with two two-state inputs, b Product Details GSM Datalogger is designed to record from two external temperature probes and two two-state inputs. In case of exceeded set limits, SMS and JSON messages can be sent via GPRS data connection. Measured values can be sent to the internet storage COMET Cloud, which is a complete monitoring, alarm and analysis system. It is also possible to set the regular sending of JSON messages to COMET Database, the sending interval is adjustable. Alarms are also indicated locally by LED, LCD and acoustically by built-in beeper. The recording is performed in a non-volatile electronic memory. The data can be transferred to a PC via included USB-C cable. GSM recorder includes Traceable calibration certificate with declared metrological traceability of etalons is based on requirements of EN ISO/IEC 17025 standard. Code U0843M Warranty 3 years TECHNICAL DATA MEASURED VALUE Temperature Two-state signal TEMPERATURE SENSOR - EXTERNAL PROBE PT1000 Measuring range -200 to +260 °C Accuracy ±0.2°C; ±0,2 % of the measurement value in a range of +100 to +260 °C Resolution 0.1 °C Response time t90 of temperature measurement (temperature step 20°C, air flow approximately 1m/s) according to the connected probe BINARY INPUT Parameters of the voltage contact „L“ level input voltage:< 0,4 V(*); „H“ level input voltage:> 2 V; Minimum voltage applicable:0 V; Maximum voltage applicable:+30 V DC Parameters of the voltage-free contact Contact resistance in „switched-on“ state:< 10 kOhm; Contact resistance in the „switched-off“ state:> 300 kOhm; Contact voltage in the „switched-off“ state:ca 3 V; Minimum state duration necessary for latching the state:1s GENERAL TECHNICAL DATA Operating temperature -20 to +60 °C Channels 2x external temperature probe, 2x binary input Memory 500,000 values in noncyclic logging mode; 350,000 values in cyclic record mode Recording interval adjustable from 1 s to 24 h Display and alarm refresh adjustable 1 s, 10 s, 1 min Recording mode noncyclic - data logging stops after filling the memory cyclic - after filling memory oldest data is overwritten by new Real time clock year, leap year, month, day, hour, minute, second Power battery SONY LiIon 5200mAh Protection class IP20 Dimensions 61 x 93 x 53 mm, with antenna 120 x 93 x 53 mm Weight (including batteries) approx. 270 g Warranty 3 years	COMET U0121Msim IoT Wireless Temperature Datalogger for 2 external probes, with built-in GSM modem a Product Details GSM Datalogger is designed to record temperature from two external Pt1000 probes. In case of exceeded set limits, SMS and JSON messages can be sent via GPRS data connection. Measured values can be sent to the internet storage COMET Cloud, which is a complete monitoring, alarm and analysis system. It is also possible to set the regular sending of JSON messages to COMET Database, the sending interval is adjustable. Alarms are also indicated locally by LED, LCD and acoustically by built-in beeper. The recording is performed in a non-volatile electronic memory. The data can be transferred to a PC via included USB-C cable. The device includes Traceable calibration certificate with declared metrological traceability of etalons is based on requirements of EN ISO/IEC 17025 standard. Code U0121Msim Warranty 3 years TECHNICAL DATA MEASURED VALUE Temperature TEMPERATURE SENSOR - EXTERNAL PROBE PT1000 Measuring range -200 to +260 °C Accuracy ±0.2°C; ±0.2 % of the measurement value in a range of +100 to +260 °C Resolution 0.1 °C Response time t90 of temperature measurement (temperature step 20°C, air flow approximately 1m/s) according to the connected probe GENERAL TECHNICAL DATA Operating temperature -20 to +60 °C Channels 2x external temperature probe Memory 500,000 values in noncyclic logging mode; 350,000 values in cyclic record mode Recording interval adjustable from 1 s to 24 h Display and alarm refresh adjustable 1 s, 10 s, 1 min Recording mode noncyclic - data logging stops after filling the memory cyclic - after filling memory oldest data is overwritten by new Real time clock year, leap year, month, day, hour, minute, second Power battery SONY LiIon 5200mAh Protection class IP67 Dimensions 61 x 93 x 53 mm, with antenna 120 x 93 x 53 mm Weight (including batteries) approx. 270 g Warranty 3 years	COMET U0121M IoT Wireless Temperature Datalogger for 2 external probes, with built-in GSM modem Product Details GSM Datalogger is designed to record temperature from two external Pt1000 probes. In case of exceeded set limits, SMS and JSON messages can be sent via GPRS data connection. Measured values can be sent to the internet storage COMET Cloud, which is a complete monitoring, alarm and analysis system. It is also possible to set the regular sending of JSON messages to COMET Database, the sending interval is adjustable. Alarms are also indicated locally by LED, LCD and acoustically by built-in beeper. The recording is performed in a non-volatile electronic memory. The data can be transferred to a PC via included USB-C cable. The device includes Traceable calibration certificate with declared metrological traceability of etalons is based on requirements of EN ISO/IEC 17025 standard. Code U0121M Warranty 3 years TECHNICAL DATA MEASURED VALUE Temperature TEMPERATURE SENSOR - EXTERNAL PROBE PT1000 Measuring range -200 to +260 °C Accuracy ±0.2°C; ±0.2 % of the measurement value in a range of +100 to +260 °C Resolution 0.1 °C Response time t90 of temperature measurement (temperature step 20°C, air flow approximately 1m/s) according to the connected probe GENERAL TECHNICAL DATA Operating temperature -20 to +60 °C Channels 2x external temperature probe Memory 500,000 values in noncyclic logging mode; 350,000 values in cyclic record mode Recording interval adjustable from 1 s to 24 h Display and alarm refresh adjustable 1 s, 10 s, 1 min Recording mode noncyclic - data logging stops after filling the memory cyclic - after filling memory oldest data is overwritten by new Real time clock year, leap year, month, day, hour, minute, second Power battery SONY LiIon 5200mAh Protection class IP67 Dimensions 61 x 93 x 53 mm, with antenna 120 x 93 x 53 mm Weight (including batteries) approx. 270 g Warranty 3 years	COMET U3120Msim IoT Wireless Temperature and Relative Humidity Datalogger, with built-in GSM modem a Product Details IoT Wireless Datalogger kit with built-in GSM modem and Flat Rate SIM Card allows the instant connection to the COMET Cloud. IoT Datalogger is designed to record temperature and humidity from built-in sensors. In case of exceeded set limits e-mail is sent from the COMET Cloud. Alarms are also indicated locally by LED, LCD and acoustically by built-in beeper. The recording is performed in a non-volatile electronic memory. The data can be transferred to a PC via included USB-C cable. GSM recorder includes Traceable calibration certificate with declared metrological traceability of etalons is based on requirements of EN ISO/IEC 17025 standard. Code U3120Msim Warranty 3 years TECHNICAL DATA MEASURED VALUE Temperature Relative humidity Counted values (dew point…) TEMPERATURE SENSOR Measuring range -20 to +60 °C Accuracy ±0.4 °C Resolution 0.1 °C HUMIDITY SENSOR Measuring range 0 to 100 % RH Accuracy ± 1.8 % RH Resolution 0.1% RH DEW POINT Measuring range -90 to +60 °C Accuracy ±1.5 °C at ambient temperature T <25 °C and RH >30 % Resolution 0.1 °C GENERAL TECHNICAL DATA Operating temperature -20 to +60 °C Channels internal temperature and humidity sensor Memory 500,000 values in noncyclic logging mode; 350,000 values in cyclic record mode Recording interval adjustable from 1 s to 24 h Display and alarm refresh adjustable 1 s, 10 s, 1 min Recording mode noncyclic - data logging stops after filling the memory cyclic - after filling memory oldest data is overwritten by new Real time clock year, leap year, month, day, hour, minute, second Power battery SONY LiIon 5200mAh Protection class IP67 electronics; IP30 sensors Dimensions 61 x 93 x 53 mm, with antenna 120 x 93 x 53 mm Weight (including batteries) approx. 260 g Warranty 3 years
COMET U3120M IoT Wireless Temperature and Relative Humidity Datalogger, with built-in GSM modem Product Details GSM datalogger is designed to record temperature and humidity from built-in sensors. In case of exceeded set limits, SMS and JSON messages can be sent via GPRS data connection. Measured values can be sent to the internet storage COMET Cloud, which is a complete monitoring, alarm and analysis system. It is also possible to set the regular sending of JSON messages to COMET Database, the sending interval is adjustable. Alarms are also indicated locally by LED, LCD and acoustically by built-in beeper. The recording is performed in a non-volatile electronic memory. The data can be transferred to a PC via included USB-C cable. GSM recorder includes Traceable calibration certificate with declared metrological traceability of etalons is based on requirements of EN ISO/IEC 17025 standard. Code U3120M Warranty 3 years TECHNICAL DATA MEASURED VALUE Temperature Relative humidity Counted values (dew point…) TEMPERATURE SENSOR Measuring range -20 to +60 °C Accuracy ±0.4 °C Resolution 0.1 °C HUMIDITY SENSOR Measuring range 0 to 100 % RH Accuracy ± 1.8 % RH Resolution 0.1% RH DEW POINT Measuring range -90 to +60 °C Accuracy ±1.5 °C at ambient temperature T <25 °C and RH >30 % Resolution 0.1 °C GENERAL TECHNICAL DATA Operating temperature -20 to +60 °C Channels internal temperature and humidity sensor Memory 500,000 values in noncyclic logging mode; 350,000 values in cyclic record mode Recording interval adjustable from 1 s to 24 h Display and alarm refresh adjustable 1 s, 10 s, 1 min Recording mode noncyclic - data logging stops after filling the memory cyclic - after filling memory oldest data is overwritten by new Real time clock year, leap year, month, day, hour, minute, second Power battery SONY LiIon 5200mAh Protection class IP67 electronics; IP30 sensors Dimensions 61 x 93 x 53 mm, with antenna 120 x 93 x 53 mm Weight (including batteries) approx. 260 g Warranty 3 years	COMET U3631Msim IoT Wireless Temperature and Relative Humidity Datalogger with connector for other t Product Details IoT Wireless Datalogger kit with built-in GSM modem and Flat Rate SIM Card allows the instant connection to the COMET Cloud. Measured values can be sent to the internet storage COMET Cloud, which is a complete monitoring, alarm and analysis system. In case of exceeded set limits e-mail is sent from the COMET Cloud. Alarms are also indicated locally by LED, LCD and acoustically by built-in beeper. The recording is performed in a non-volatile electronic memory. The data can be transferred to a PC via included USB-C cable. GSM recorder includes Traceable calibration certificate with declared metrological traceability of etalons is based on requirements of EN ISO/IEC 17025 standard. Code U3631Msim Warranty 3 years TECHNICAL DATA MEASURED VALUE Temperature Relative humidity Counted values (dew point…) TEMPERATURE SENSOR Measuring range -20 to +60 °C Accuracy ±0.4 °C Resolution 0.1 °C TEMPERATURE SENSOR - EXTERNAL PROBE PT1000 Measuring range -90 to +260 °C Accuracy ±0.2 °C (-50 to +100 °C); ±0.2 % from reading from +100 to +260 °C; ±0.4 % from reading from -90 to -50 °C Resolution 0.1 °C HUMIDITY SENSOR Measuring range 0 to 100 % RH Accuracy ± 1.8 % RH Resolution 0.1% RH DEW POINT Measuring range -90 to +60 °C Accuracy ±1.5 °C at ambient temperature T <25 °C and RH >30 % Resolution 0.1 °C GENERAL TECHNICAL DATA Operating temperature -20 to +60 °C Channels internal temperature and humidity sensor, 1x external temperature probe Memory 500,000 values in noncyclic logging mode; 350,000 values in cyclic record mode Recording interval adjustable from 1 s to 24 h Display and alarm refresh adjustable 1 s, 10 s, 1 min Recording mode noncyclic - data logging stops after filling the memory cyclic - after filling memory oldest data is overwritten by new Real time clock year, leap year, month, day, hour, minute, second Power battery SONY LiIon 5200mAh Protection class IP67 electronics; IP30 sensors Dimensions 61 x 93 x 53 mm, with antenna 120 x 93 x 53 mm Weight (including batteries) approx. 260 g Warranty 3 years	COMET U3631M IoT Wireless Temperature and Relative Humidity Datalogger with connector for other temp Product Details GSM datalogger is designed to record temperature and humidity from built-in sensors and temperature from external probe. In case of exceeded set limits, SMS and JSON messages can be sent via GPRS data connection. Measured values can be sent to the internet storage COMET Cloud, which is a complete monitoring, alarm and analysis system. It is also possible to set the regular sending of JSON messages to COMET Database, the sending interval is adjustable. Alarms are also indicated locally by LED, LCD and acoustically by built-in beeper. The recording is performed in a non-volatile electronic memory. The data can be transferred to a PC via included USB-C cable. GSM recorder includes Traceable calibration certificate with declared metrological traceability of etalons is based on requirements of EN ISO/IEC 17025 standard. Code U3631M Warranty 3 years TECHNICAL DATA MEASURED VALUE Temperature Relative humidity Counted values (dew point…) TEMPERATURE SENSOR Measuring range -20 to +60 °C Accuracy ±0.4 °C Resolution 0.1 °C TEMPERATURE SENSOR - EXTERNAL PROBE PT1000 Measuring range -90 to +260 °C Accuracy ±0.2 °C (-50 to +100 °C); ±0.2 % from reading from +100 to +260 °C; ±0.4 % from reading from -90 to -50 °C Resolution 0.1 °C HUMIDITY SENSOR Measuring range 0 to 100 % RH Accuracy ± 1.8 % RH Resolution 0.1% RH DEW POINT Measuring range -90 to +60 °C Accuracy ±1.5 °C at ambient temperature T <25 °C and RH >30 % Resolution 0.1 °C GENERAL TECHNICAL DATA Operating temperature -20 to +60 °C Channels internal temperature and humidity sensor, 1x external temperature probe Memory 500,000 values in noncyclic logging mode; 350,000 values in cyclic record mode Recording interval adjustable from 1 s to 24 h Display and alarm refresh adjustable 1 s, 10 s, 1 min Recording mode noncyclic - data logging stops after filling the memory cyclic - after filling memory oldest data is overwritten by new Real time clock year, leap year, month, day, hour, minute, second Power battery SONY LiIon 5200mAh Protection class IP67 electronics; IP30 sensors Dimensions 61 x 93 x 53 mm, with antenna 120 x 93 x 53 mm Weight (including batteries) approx. 260 g Warranty 3 years	COMET U3121Msim IoT Wireless Temperature and Relative Humidity Datalogger for external probe, with b Product Details IoT Wireless Datalogger kit with built-in GSM modem and Flat Rate SIM Card allows the instant connection to the COMET Cloud. IoT Datalogger is designed to record temperature and humidity from external sensors (not included). In case of exceeded set limits e-mail is sent from the COMET Cloud. Alarms are also indicated locally by LED, LCD and acoustically by built-in beeper. The recording is performed in a non-volatile electronic memory. The data can be transferred to a PC via included USB-C cable. GSM recorder includes Traceable calibration certificate with declared metrological traceability of etalons is based on requirements of EN ISO/IEC 17025 standard. Code U3121Msim Warranty 3 years TECHNICAL DATA MEASURED VALUE Temperature Relative humidity Counted values (dew point…) TEMPERATURE SENSOR Measuring range according to the connected probe Digi/E Accuracy according to the connected probe Digi/E Resolution 0.1 °C Response time t90 of temperature measurement (temperature step 20°C, air flow approximately 1m/s) 8 min HUMIDITY SENSOR Measuring range according to the connected probe Digi/E Accuracy according to the connected probe Digi/E Resolution 0.1% RH DEW POINT Measuring range according to the connected probe Digi/E Accuracy according to the connected probe Digi/E Resolution 0.1 °C GENERAL TECHNICAL DATA Operating temperature -20 to +60 °C Channels 1x connectable temperature+humidity probe Memory 500,000 values in noncyclic logging mode; 350,000 values in cyclic record mode Recording interval adjustable from 1 s to 24 h Display and alarm refresh adjustable 1 s, 10 s, 1 min Recording mode noncyclic - data logging stops after filling the memory cyclic - after filling memory oldest data is overwritten by new Real time clock year, leap year, month, day, hour, minute, second Power battery SONY LiIon 5200mAh Protection class IP67 Dimensions 61 x 93 x 53 mm, with antenna 120 x 93 x 53 mm Weight (including batteries) approx. 260 g Warranty 3 years
COMET LP105 IoT ready Flat Rate SIM Card Product Details All-inclusive SIM card for IoT connectivity. It is a pre-paid offering to connect IoT devices with long term connectivity, including all necessary features such as data allowance, SIM card cost, APN, VPN. Offers managed connectivity services for low bandwidth IoT applications. It has developed a disruptive price model for IoT connectivity. The SIM card does not allow sending SMS. Currently the IoT SIM Card footprint includes more than 100 countries. SIM card lifetime is 2.5 years with 5 minutes interval, 5 years with 10 minutes interval. Code LP105 TECHNICAL DATA GENERAL TECHNICAL DATA Data volume 500MB (Up to 500,000 Cycles) Data Retention 2.5 years with 5 minutes interval, 5 years with 10 minutes interval Operating temperature -25°C to +85°C Coverage all European countries	COMET U3121M IoT Wireless Temperature and Relative Humidity Datalogger for external probe, with buil Product Details GSM datalogger is designed to record temperature and humidity from external probe. In case of exceeded set limits, SMS and JSON messages can be sent via GPRS data connection. Measured values can be sent to the internet storage COMET Cloud, which is a complete monitoring, alarm and analysis system. It is also possible to set the regular sending of JSON messages to COMET Database, the sending interval is adjustable. Alarms are also indicated locally by LED, LCD and acoustically by built-in beeper. The recording is performed in a non-volatile electronic memory. The data can be transferred to a PC via included USB-C cable. The temperature and humidity probe is not included in delivery, probe of the appropriate length and design you can choose in optional accessories. The device includes Traceable calibration certificate with declared metrological traceability of etalons is based on requirements of EN ISO/IEC 17025 standard. Code U3121M Warranty 3 years TECHNICAL DATA MEASURED VALUE Temperature Relative humidity Counted values (dew point…) TEMPERATURE SENSOR Measuring range according to the connected probe Digi/E Accuracy according to the connected probe Digi/E Resolution 0.1 °C Response time t90 of temperature measurement (temperature step 20°C, air flow approximately 1m/s) 8 min HUMIDITY SENSOR Measuring range according to the connected probe Digi/E Accuracy according to the connected probe Digi/E Resolution 0.1% RH DEW POINT Measuring range according to the connected probe Digi/E Accuracy according to the connected probe Digi/E Resolution 0.1 °C GENERAL TECHNICAL DATA Operating temperature -20 to +60 °C Channels 1x connectable temperature+humidity probe Memory 500,000 values in noncyclic logging mode; 350,000 values in cyclic record mode Recording interval adjustable from 1 s to 24 h Display and alarm refresh adjustable 1 s, 10 s, 1 min Recording mode noncyclic - data logging stops after filling the memory cyclic - after filling memory oldest data is overwritten by new Real time clock year, leap year, month, day, hour, minute, second Power battery SONY LiIon 5200mAh Protection class IP67 Dimensions 61 x 93 x 53 mm, with antenna 120 x 93 x 53 mm Weight (including batteries) approx. 260 g Warranty 3 years	COMET U7844Msim IoT Wireless Four channel Datalogger with pulse and two-state inputs, with built-in Product Details IoT Wireless Datalogger kit with built-in GSM modem and Flat Rate SIM Card allows the instant connection to the COMET Cloud. IoT Datalogger is designed to record from four binary inputs or from two pulse and two binary inputs. In case of exceeded set limits e-mail is sent from the COMET Cloud. Alarms are also indicated locally by LED, LCD and acoustically by built-in beeper. The recording is performed in a non-volatile electronic memory. The data can be transferred to a PC via included USB-C cable. GSM recorder includes Traceable calibration certificate with declared metrological traceability of etalons is based on requirements of EN ISO/IEC 17025 standard. Code U7844Msim Warranty 3 years TECHNICAL DATA MEASURED VALUE Two-state signal Pulses BINARY INPUT Parameters of the voltage contact „L“ level input voltage:< 0,4 V(*); „H“ level input voltage:> 2 V; Minimum voltage applicable:0 V; Maximum voltage applicable:+30 V DC Parameters of the voltage-free contact Contact resistance in „switched-on“ state:< 10 kOhm; Contact resistance in the „switched-off“ state:> 300 kOhm; Contact voltage in the „switched-off“ state:ca 3 V; Minimum state duration necessary for latching the state:1s COUNTER INPUT Counter parameters Range 24 bits (16 777 215), possibility of letting the counter overflow Maximum pulse frequency configured for voltage input - max. 5kHz configured for a voltage-free or open-collector transistor - max. 200Hz GENERAL TECHNICAL DATA Operating temperature -20 to +60 °C Channels 4x binary input nebo 2x binary input a 2x counter Memory 500,000 values in noncyclic logging mode; 350,000 values in cyclic record mode Recording interval adjustable from 1 s to 24 h Display and alarm refresh adjustable 1 s, 10 s, 1 min Recording mode noncyclic - data logging stops after filling the memory cyclic - after filling memory oldest data is overwritten by new Real time clock year, leap year, month, day, hour, minute, second Power battery SONY LiIon 5200mAh Protection class IP20 Dimensions 61 x 93 x 53 mm, with antenna 120 x 93 x 53 mm Weight (including batteries) approx. 270 g Warranty 3 years	COMET U7844M IoT Wireless Four channel Datalogger with pulse and two-state inputs, with built-in GSM Product Details GSM datalogger is designed to record from four binary inputs or from two pulse and two binary inputs. In case of exceeded set limits, SMS and JSON messages can be sent via GPRS data connection. Measured values can be sent to the internet storage COMET Cloud, which is a complete monitoring, alarm and analysis system. It is also possible to set the regular sending of JSON messages to COMET Database, the sending interval is adjustable. Alarms are also indicated locally by LED, LCD and acoustically by built-in beeper. The recording is performed in a non-volatile electronic memory. The data can be transferred to a PC via included USB-C cable. GSM datalogger inputs can be set up for four binary inputs or two binary inputs and two pulse counters. The device includes Traceable calibration certificate with declared metrological traceability of etalons is based on requirements of EN ISO/IEC 17025 standard. Code U7844M Warranty 3 years TECHNICAL DATA MEASURED VALUE Two-state signal Pulses BINARY INPUT Parameters of the voltage contact „L“ level input voltage:< 0,4 V(*); „H“ level input voltage:> 2 V; Minimum voltage applicable:0 V; Maximum voltage applicable:+30 V DC Parameters of the voltage-free contact Contact resistance in „switched-on“ state:< 10 kOhm; Contact resistance in the „switched-off“ state:> 300 kOhm; Contact voltage in the „switched-off“ state:ca 3 V; Minimum state duration necessary for latching the state:1s COUNTER INPUT Counter parameters Range 24 bits (16 777 215), possibility of letting the counter overflow Maximum pulse frequency configured for voltage input - max. 5kHz configured for a voltage-free or open-collector transistor - max. 200Hz GENERAL TECHNICAL DATA Operating temperature -20 to +60 °C Channels 4x binary input nebo 2x binary input a 2x counter Memory 500,000 values in noncyclic logging mode; 350,000 values in cyclic record mode Recording interval adjustable from 1 s to 24 h Display and alarm refresh adjustable 1 s, 10 s, 1 min Recording mode noncyclic - data logging stops after filling the memory cyclic - after filling memory oldest data is overwritten by new Real time clock year, leap year, month, day, hour, minute, second Power battery SONY LiIon 5200mAh Protection class IP20 Dimensions 61 x 93 x 53 mm, with antenna 120 x 93 x 53 mm Weight (including batteries) approx. 270 g Warranty 3 years
COMET U6841Msim IoT Wireless Datalogger for 3 current inputs 0-20mA and 1 two-state input, with buil Product Details IoT Wireless Datalogger kit with built-in GSM modem and Flat Rate SIM Card allows the instant connection to the COMET Cloud. IoT Datalogger is designed to record 3 current inputs and 1 binary input. In case of exceeded set limits e-mail is sent from the COMET Cloud. Alarms are also indicated locally by LED, LCD and acoustically by built-in beeper. The recording is performed in a non-volatile electronic memory. The data can be transferred to a PC via included USB-C cable. GSM recorder includes Traceable calibration certificate with declared metrological traceability of etalons is based on requirements of EN ISO/IEC 17025 standard. Code U6841Msim Warranty 3 years TECHNICAL DATA MEASURED VALUE Current Two-state signal CURRENT INPUT Measuring range 0 to 20 mA DC Resolution better than 1 µA Accuracy ±20 µA Input resistance approx. 100 Ω Minimum current 0 mA (open circuit) Maximum current limited to approx. 40 mA BINARY INPUT Parameters of the voltage contact „L“ level input voltage:< 0,8 V(*); „H“ level input voltage:> 2 V; Minimum voltage applicable:0 V; Maximum voltage applicable:+30 V DC Parameters of the voltage-free contact Contact resistance in „switched-on“ state:< 10 kOhm; Contact resistance in the „switched-off“ state:> 2 MOhm; Contact voltage in the „switched-off“ state:ca 3 V; Minimum state duration necessary for latching the state:1s GENERAL TECHNICAL DATA Operating temperature -20 to +60 °C Channels 3x current input, 1x binary input Memory 500,000 values in noncyclic logging mode; 350,000 values in cyclic record mode Recording interval adjustable from 1 s to 24 h Display and alarm refresh adjustable 1 s, 10 s, 1 min Recording mode noncyclic - data logging stops after filling the memory cyclic - after filling memory oldest data is overwritten by new Real time clock year, leap year, month, day, hour, minute, second Power battery SONY LiIon 5200mAh Protection class IP20 Dimensions 61 x 93 x 53 mm, with antenna 120 x 93 x 53 mm Weight (including batteries) approx. 270 g Warranty 3 years	COMET U6841M IoT Wireless Datalogger for 3 current inputs 0-20mA and 1 two-state input, with built-i Product Details GSM datalogger is designed to record 3 current inputs and 1 binary input. In case of exceeded set limits, SMS and JSON messages can be sent via GPRS data connection. Measured values can be sent to the internet storage COMET Cloud, which is a complete monitoring, alarm and analysis system. It is also possible to set the regular sending of JSON messages to COMET Database, the sending interval is adjustable. Alarms are also indicated locally by LED, LCD and acoustically by built-in beeper. The recording is performed in a non-volatile electronic memory. The data can be transferred to a PC via included USB-C cable. GSM recorder includes Traceable calibration certificate with declared metrological traceability of etalons is based on requirements of EN ISO/IEC 17025 standard. Code U6841M Warranty 3 years TECHNICAL DATA MEASURED VALUE Current Two-state signal CURRENT INPUT Measuring range 0 to 20 mA DC Resolution better than 1 µA Accuracy ±20 µA Input resistance approx. 100 Ω Minimum current 0 mA (open circuit) Maximum current limited to approx. 40 mA BINARY INPUT Parameters of the voltage contact „L“ level input voltage:< 0,8 V(*); „H“ level input voltage:> 2 V; Minimum voltage applicable:0 V; Maximum voltage applicable:+30 V DC Parameters of the voltage-free contact Contact resistance in „switched-on“ state:< 10 kOhm; Contact resistance in the „switched-off“ state:> 2 MOhm; Contact voltage in the „switched-off“ state:ca 3 V; Minimum state duration necessary for latching the state:1s GENERAL TECHNICAL DATA Operating temperature -20 to +60 °C Channels 3x current input, 1x binary input Memory 500,000 values in noncyclic logging mode; 350,000 values in cyclic record mode Recording interval adjustable from 1 s to 24 h Display and alarm refresh adjustable 1 s, 10 s, 1 min Recording mode noncyclic - data logging stops after filling the memory cyclic - after filling memory oldest data is overwritten by new Real time clock year, leap year, month, day, hour, minute, second Power battery SONY LiIon 5200mAh Protection class IP20 Dimensions 61 x 93 x 53 mm, with antenna 120 x 93 x 53 mm Weight (including batteries) approx. 270 g Warranty 3 years	COMET U8410Msim IoT Wireless CO2 datalogger with built-in sensor, GSM modem and Flat Rate SIM Card Product Details IoT Wireless Datalogger kit with built-in GSM modem and Flat Rate SIM Card allows the instant connection to the COMET Cloud. IoT Datalogger is designed to record CO2 from built-in sensor. In case of exceeded set limits e-mail is sent from the COMET Cloud. Alarms are also indicated locally by LED, LCD and acoustically by built-in beeper. The recording is performed in a non-volatile electronic memory. The data can be transferred to a PC via included USB-C cable. GSM recorder includes Traceable calibration certificate with declared metrological traceability of etalons is based on requirements of EN ISO/IEC 17025 standard. Code U8410Msim Warranty 3 years TECHNICAL DATA MEASURED VALUE CO2 CO2 SENSOR Measuring range 0 to 5000 ppm Accuracy ±(50ppm +3% from reading) at 25°C and 1013hPa Resolution 1 ppm GENERAL TECHNICAL DATA Operating temperature -20 to +60 °C Channels internal sensor for CO2 Memory 500,000 values in noncyclic logging mode; 350,000 values in cyclic record mode Recording interval adjustable from 1 s to 24 h Display and alarm refresh adjustable 1 s, 10 s, 1 min Recording mode noncyclic - data logging stops after filling the memory cyclic - after filling memory oldest data is overwritten by new Real time clock year, leap year, month, day, hour, minute, second Power battery SONY LiIon 5200mAh Protection class IP20 Dimensions 61 x 93 x 53 mm, with antenna 120 x 93 x 53 mm Weight (including batteries) approx. 250 g Warranty 3 years	COMET U8410M IoT Wireless CO2 datalogger with built-in sensor, GSM modem Product Details GSM datalogger is designed to record CO2 from built-in sensor. In case of exceeded set limits, SMS and JSON messages can be sent via GPRS data connection. Measured values can be sent to the internet storage COMET Cloud, which is a complete monitoring, alarm and analysis system. It is also possible to set the regular sending of JSON messages to COMET Database, the sending interval is adjustable. Alarms are also indicated locally by LED, LCD and acoustically by built-in beeper. The recording is performed in a non-volatile electronic memory. The data can be transferred to a PC via included USB-C cable. GSM recorder includes Traceable calibration certificate with declared metrological traceability of etalons is based on requirements of EN ISO/IEC 17025 standard. Code U8410M Warranty 3 years TECHNICAL DATA MEASURED VALUE CO2 CO2 SENSOR Measuring range 0 to 5000 ppm Accuracy ±(50ppm +3% from reading) at 25°C and 1013hPa Resolution 1 ppm GENERAL TECHNICAL DATA Operating temperature -20 to +60 °C Channels internal sensor for CO2 Memory 500,000 values in noncyclic logging mode; 350,000 values in cyclic record mode Recording interval adjustable from 1 s to 24 h Display and alarm refresh adjustable 1 s, 10 s, 1 min Recording mode noncyclic - data logging stops after filling the memory cyclic - after filling memory oldest data is overwritten by new Real time clock year, leap year, month, day, hour, minute, second Power battery SONY LiIon 5200mAh Protection class IP20 Dimensions 61 x 93 x 53 mm, with antenna 120 x 93 x 53 mm Weight (including batteries) approx. 250 g Warranty 3 years
1 - 24 of 26 \|<1 2 >\|

© 2019 - 2024 Mobicon - Remote Electronic Sdn Bhd (548591-V)
Visitors: 3762680
Powered by N.MY

Recent Updates