Visit
Official Website

Mobicon - Remote Electronic Sdn Bhd
19, Jalan PJS 3/59,
Taman Sri Manja,
46000 Petaling Jaya,
Selangor, Malaysia.

+603-7783 2257
+603-7783 4316
+603-7783 4318

Wi-Fi Converter Selangor, Malaysia, Kuala Lumpur (KL), Petaling Jaya (PJ)

LUTRON RSW-923 RS232 to WIFI CONVERTER

Description

3 meters input
RS232 to WiFi CONVERTER
Model : RSW-923
* When LUTRON meters ( max. 3 meters ) with RS232 interface are connected to RSW-923, the meters
 can share data via WiFi technology. Therefore, personal devices, like desktop, laptop, smart phone,
 tablet... with WiFi function can be read the measuring data via WiFi. For example, museum has many
 show rooms in an open space. If each show room installs three Humidity/temp. indicator MHT-381SD
 with RSW-923, museum IT control center can monitor 3 sets humidity and temperature information
 in each room via WiFi network.
* Allow 1 to max. 3 meters and max. 12 channels ( the total ch. no. of all meters ) input.
* Basic setting of WiFi ( key in from the front buttons ) :
 1. Net mode ( Client or AP, default to Client ), 2. SSID, 3. Pass word, 4. IP address, 5. Port,
 6. Gateway.
* Dot matrix LCD display.
* Five input/output terminals :
 1. DC 9V power input.
 2. DC 9V power output ( power supply for the connecting RS232 meter ).
 3. Meter 1 RS232 input ( photo isolate RS232 type ).
 4. Meter 2 RS232 input ( photo isolate RS232 type ).
 5. Meter 3 RS232 input ( photo isolate RS232 type ).
* Accessories included :
 1. ACV to DC 9V POWER adapter.
 2. RS232 interface cable, UPCB-03 x 3 PCs.
 3. Power interface cable ( Connect the power cable to the RS232 meter ), PWCB-06 x 1 PC.
* APP ( Android ) and APP ( IOS ) are available.
* After smart phone or tablet install the APP, user can monitor the measurement value, log.
* High/Low alarm or send the warning message out via SMS or email.

LUTRON RSW-914 DIRECT WIFI CONVERTER

Description

DIRECT WiFi CONVERTER
Model : RSW-914
* When LUTRON meter with RS232 interface is connected to RSW-914, the meter can share data
 via WiFi technology. Therefore, personal devices, like desktop, laptop, smart phone, tablet...
 with WiFi function can be read the measuring data via WiFi. For example, if factory installs
 Power analyzer DW-6095 with RSW-914, then operator can monitor the power information
 ( measuring value ) via WiFi network with safety.
* Allow 1 meter and max. 12 channels ( the total ch. no. ) input.
* Easy operation, no setting requirement in the RSW-914 are required, just connecting the RSW-914
 to RS232 meter and power ON only.
* Three input/output terminals :
 1. DC 9V power input.
 2. DC 9V power output ( power supply for the connecting RS232 meter ).
 3. Meter RS232 input ( photo isolate RS232 type ).
* Accessories included :
 1. ACV to DC 9V POWER adapter.
 2. RS232 interface cable, UPCB-03 x 1 PC.
* APP ( Android ) and APP ( IOS ) are available.
* After smart phone or tablet install the APP, following to select the WiFi SSID of RSW-914, then
 user can monitor the measurement value, log, High/Low alarm or send the warning message out
 via SMS or Email.
  

Recent Updates