Supplier, Suppliers, Supply, Supplies Power Meter + Power Sensor KEYSIGHT ~ Mobicon - Remote Electronic Sdn Bhd

Visit
Official Website

Mobicon - Remote Electronic Sdn Bhd
19, Jalan PJS 3/59,
Taman Sri Manja,
46000 Petaling Jaya,
Selangor, Malaysia.

+603-7783 2257

+603-7783 4316
+603-7783 4318

sales-kl@mobicon.com.my

Power Meter + Power Sensor Selangor, Malaysia, Kuala Lumpur (KL), Petaling Jaya (PJ)

1 - 24 of 66 \|<1 2 3 >\|
KEYSIGHT N8482A Thermocouple Power Sensors Product Details N8480 Series Power Sensors are the replacement solutions for 8480 Series Power Sensors. EEPROM to store cal factors eliminates manual entry Wide frequency range from 100 kHz to 6 GHz Wide dynamic range from -35 dBm to +20 dBm Best-in-class power linearity of less than 1%, excellent SWR of mismatch uncertainty and highly accurate power repeatability Accurate calibration and traceability to US National Institute of Standards and Technology (NIST) SCPI codes compatible with 8480 series (option CFT) Note: Option CFT is available as a replacement of legacy 8480 Series power sensors intended for cal factor manual entry and SCPI compatibility. Option CFT is not compatible with 43x and other obsolete power meters. SCPI codes compatible with E-Series sensor (standard option) Compatible with EPM (new N1913/14A, E4418/19B), EPM-P (E4416/17A), P-Series (N1911/12A) power meters (Firmware upgrade required) Note: All N8480 series power sensors are not compatible with the Keysight 43x, E1416A, N8262A power meters, 5314x microwave counters and E7495x base station test set. (More information) N8480 Series Power Sensors are the replacement solutions for 8480 Series Power Sensors. The new power sensors are integrated with EEPROM feature, which allows users to calibrate the power sensors without manually entering the calibration factors to the power meter. By comparing to legacy 8480 Series Power Sensors, there are tremendous improvements such as wider dynamic range and frequency range, better accuracy, linearity, repeatability, and SWR.	KEYSIGHT N8481A Thermocouple Power Sensors Product Details N8480 Series Power Sensors are the replacement solutions for 8480 Series Power Sensors. EEPROM to store cal factors eliminates manual entry Wide frequency range from 10 MHz to 18 GHz Wide dynamic range from -35 dBm to +20 dBm Best-in-class power linearity of less than 1%, excellent SWR of mismatch uncertainty and highly accurate power repeatability Accurate calibration and traceability to US National Institute of Standards and Technology (NIST) SCPI codes compatible with 8480 series (option CFT) Note: Option CFT is available as a replacement of legacy 8480 Series power sensors intended for cal factor manual entry and SCPI compatibility. Option CFT is not compatible with 43x and other obsolete power meters. SCPI codes compatible with E-Series sensor (standard option) Compatible with EPM (new N1913/14A, E4418/19B), EPM-P (E4416/17A), P-Series (N1911/12A) power meters (Firmware upgrade required) Note: All N8480 series power sensors are not compatible with the Keysight 43x, E1416A, N8262A power meters, 5314x microwave counters and E7495x base station test set. (More information) N8480 Series Power Sensors are the replacement solutions for 8480 Series Power Sensors. The new power sensors are integrated with EEPROM feature, which allows users to calibrate the power sensors without manually entering the calibration factors to the power meter. By comparing to legacy 8480 Series Power Sensors, there are tremendous improvements such as wider dynamic range and frequency range, better accuracy, linearity, repeatability, and SWR.	KEYSIGHT N8486AR Thermocouple Power Sensors Product Details N8480 Series Power Sensors are the replacement solutions for 8480 Series Power Sensors. EEPROM to store cal factors eliminates manual entry Wide frequency range from 26.5 GHz to 40 GHz Wide dynamic range from -35 dBm to +20 dBm Best-in-class power linearity of less than 1%, excellent SWR of mismatch uncertainty and highly accurate power repeatability Accurate calibration and traceability to US National Institute of Standards and Technology (NIST) SCPI codes compatible with 8480 series (option CFT) Note: Option CFT is available as a replacement of legacy 8480 Series power sensors intended for cal factor manual entry and SCPI compatibility. Option CFT is not compatible with 43x and other obsolete power meters. SCPI codes compatible with E-Series sensor (standard option) Compatible with EPM (new N1913/14A, E4418/19B), EPM-P (E4416/17A), P-Series (N1911/12A) power meters (Firmware upgrade required) Note: All N8480 series power sensors are not compatible with the Keysight 43x, E1416A, N8262A power meters, 5314x microwave counters and E7495x base station test set. (More information) N8480 Series Power Sensors are the replacement solutions for 8480 Series Power Sensors. The new power sensors are integrated with EEPROM feature, which allows users to calibrate the power sensors without manually entering the calibration factors to the power meter. By comparing to legacy 8480 Series Power Sensors, there are tremendous improvements such as wider dynamic range and frequency range, better accuracy, linearity, repeatability, and SWR.	KEYSIGHT N8486AQ Thermocouple Power Sensors Product Details N8480 Series Power Sensors are the replacement solutions for 8480 Series Power Sensors. EEPROM to store cal factors eliminates manual entry Wide frequency range from 33 GHz to 50 GHz Wide dynamic range from -35 dBm to +20 dBm Best-in-class power linearity of less than 1%, excellent SWR of mismatch uncertainty and highly accurate power repeatability Accurate calibration and traceability to US National Institute of Standards and Technology (NIST) SCPI codes compatible with 8480 series (option CFT) Note: Option CFT is available as a replacement of legacy 8480 Series power sensors intended for cal factor manual entry and SCPI compatibility. Option CFT is not compatible with 43x and other obsolete power meters. SCPI codes compatible with E-Series sensor (standard option) Compatible with EPM (new N1913/14A, E4418/19B), EPM-P (E4416/17A), P-Series (N1911/12A) power meters (Firmware upgrade required) Note: All N8480 series power sensors are not compatible with the Keysight 43x, E1416A, N8262A power meters, 5314x microwave counters and E7495x base station test set. (More information) N8480 Series Power Sensors are the replacement solutions for 8480 Series Power Sensors. The new power sensors are integrated with EEPROM feature, which allows users to calibrate the power sensors without manually entering the calibration factors to the power meter. By comparing to legacy 8480 Series Power Sensors, there are tremendous improvements such as wider dynamic range and frequency range, better accuracy, linearity, repeatability, and SWR.
KEYSIGHT N8482H Thermocouple Power Sensors Product Details N8480 Series Power Sensors are the replacement solutions for 8480 Series Power Sensors. EEPROM to store cal factors eliminates manual entry Wide frequency range from 100 kHz to 6 GHz Wide dynamic range from -15 dBm to +35 dBm Best-in-class power linearity of less than 1%, excellent SWR of mismatch uncertainty and highly accurate power repeatability Accurate calibration and traceability to US National Institute of Standards and Technology (NIST) SCPI codes compatible with 8480 series (option CFT) Note: Option CFT is available as a replacement of legacy 8480 Series power sensors intended for cal factor manual entry and SCPI compatibility. Option CFT is not compatible with 43x and other obsolete power meters. SCPI codes compatible with E-Series sensor (standard option) Compatible with EPM (N1913/14A, E4418/19B), EPM-P (E4416/17A), P-Series (N1911/12A) power meters Note: All N8480 series power sensors are not compatible with the Keysight 43x, E1416A, N8262A power meters, 5314x microwave counters and E7495x base station test set.	KEYSIGHT N8482B Thermocouple Power Sensors Product Details N8480 Series Power Sensors are the replacement solutions for 8480 Series Power Sensors. EEPROM to store cal factors eliminates manual entry Wide frequency range from 100 kHz to 6 GHz Wide dynamic range from -5 dBm to +44 dBm Best-in-class power linearity of less than 1%, excellent SWR of mismatch uncertainty and highly accurate power repeatability Accurate calibration and traceability to US National Institute of Standards and Technology (NIST) SCPI codes compatible with 8480 series (option CFT) Note: Option CFT is available as a replacement of legacy 8480 Series power sensors intended for cal factor manual entry and SCPI compatibility. Option CFT is not compatible with 43x and other obsolete power meters. SCPI codes compatible with E-Series sensor (standard option) Compatible with EPM (new N1913/14A, E4418/19B), EPM-P (E4416/17A), P-Series (N1911/12A) power meters (Firmware upgrade required) Note: All N8480 series power sensors are not compatible with the Keysight 43x, E1416A, N8262A power meters, 5314x microwave counters and E7495x base station test set. (More information) N8480 Series Power Sensors are the replacement solutions for 8480 Series Power Sensors. The new power sensors are integrated with EEPROM feature, which allows users to calibrate the power sensors without manually entering the calibration factors to the power meter. By comparing to legacy 8480 Series Power Sensors, there are tremendous improvements such as wider dynamic range and frequency range, better accuracy, linearity, repeatability, and SWR.	KEYSIGHT N8481H Thermocouple Power Sensors Product Details N8480 Series Power Sensors are the replacement solutions for 8480 Series Power Sensors. EEPROM to store cal factors eliminates manual entry Wide frequency range from 10 MHz to 18 GHz Wide dynamic range from -15 dBm to +35 dBm Best-in-class power linearity of less than 1%, excellent SWR of mismatch uncertainty and highly accurate power repeatability Accurate calibration and traceability to US National Institute of Standards and Technology (NIST) SCPI codes compatible with 8480 series (option CFT) Note: Option CFT is available as a replacement of legacy 8480 Series power sensors intended for cal factor manual entry and SCPI compatibility. Option CFT is not compatible with 43x and other obsolete power meters. SCPI codes compatible with E-Series sensor (standard option) Compatible with EPM (N1913/14A, E4418/19B), EPM-P (E4416/17A), P-Series (N1911/12A) power meters Note: All N8480 series power sensors are not compatible with the Keysight 43x, E1416A, N8262A power meters, 5314x microwave counters and E7495x base station test set.	KEYSIGHT N8481B Thermocouple Power Sensors Product Details N8480 Series Power Sensors are the replacement solutions for 8480 Series Power Sensors. EEPROM to store cal factors eliminates manual entry Wide frequency range from 10 MHz to 18 GHz Wide dynamic range from -5 dBm to +44 dBm Best-in-class power linearity of less than 1%, excellent SWR of mismatch uncertainty and highly accurate power repeatability Accurate calibration and traceability to US National Institute of Standards and Technology (NIST) SCPI codes compatible with 8480 series (option CFT) Note: Option CFT is available as a replacement of legacy 8480 Series power sensors intended for cal factor manual entry and SCPI compatibility. Option CFT is not compatible with 43x and other obsolete power meters. SCPI codes compatible with E-Series sensor (standard option) Compatible with EPM (N1913/14A, E4418/19B), EPM-P (E4416/17A), P-Series (N1911/12A) power meters Note: All N8480 series power sensors are not compatible with the Keysight 43x, E1416A, N8262A power meters, 5314x microwave counters and E7495x base station test set.
KEYSIGHT N8487A Thermocouple Power Sensors Product Details N8480 Series Power Sensors are the replacement solutions for 8480 Series Power Sensors. EEPROM to store cal factors eliminates manual entry Wide frequency range from 50 MHz to 50 GHz Wide dynamic range from -35 dBm to +20 dBm Best-in-class power linearity of less than 1%, excellent SWR of mismatch uncertainty and highly accurate power repeatability Accurate calibration and traceability to US National Institute of Standards and Technology (NIST) SCPI codes compatible with 8480 series (option CFT) Note: Option CFT is available as a replacement of legacy 8480 Series power sensors intended for cal factor manual entry and SCPI compatibility. Option CFT is not compatible with 43x and other obsolete power meters. SCPI codes compatible with E-Series sensor (standard option) Compatible with EPM (new N1913/14A, E4418/19B), EPM-P (E4416/17A), P-Series (N1911/12A) power meters (Firmware upgrade required) Note: All N8480 series power sensors are not compatible with the Keysight 43x, E1416A, N8262A power meters, 5314x microwave counters and E7495x base station test set. (More information) N8480 Series Power Sensors are the replacement solutions for 8480 Series Power Sensors. The new power sensors are integrated with EEPROM feature, which allows users to calibrate the power sensors without manually entering the calibration factors to the power meter. By comparing to legacy 8480 Series Power Sensors, there are tremendous improvements such as wider dynamic range and frequency range, better accuracy, linearity, repeatability, and SWR. Can’t find what you’re looking for? Try our special options.	KEYSIGHT N8488A Thermocouple Power Sensors Product Details N8488A power sensor has the widest frequency range among N8480 power sensors offering from Keysight. EEPROM to store cal factors eliminates manual entry Wide frequency range from 10 MHz to 67 GHz (Not warranted spec from 67 to 70 GHz) Wide dynamic range from -35 to +20 dBm Best-in-class power linearity of less than 1%, excellent SWR of mismatch uncertainty and highly accurate power repeatability Accurate calibration and traceability to US National Institute of Standards and Technology (NIST) SCPI codes compatibility Compatible with EPM (N1913/14A, E4418/19B), EPM-P (E4416/17A), P-Series (N1911/12A) power meters	KEYSIGHT 11730A Power Sensor/SNS Noise Source Cable (1.5m/5 feet) Description The Keysight 11730A/B/C/D/E cables are used with the N8480/8480 and E-series power sensors (except the E9320 family of peak and average sensors). These cables are designed to reduce RFI effects on low power readings with an improved shielding design in the cable itself. Cables may be ordered individually or in pairs in any combination desired for single and dual-channel measurements. The Keysight 11730A/B/C can also be used in conjunction with the SNS series noise sources which are designed to operate with the NFA Series Noise Figure Analyzers Learn more about available Keysight Power Sensor Cable.	KEYSIGHT E9288C Power Sensor Cable (10m/31 feet) Description The E9288C power sensor cable (blue) must be used with the E9320 family of peak and average power sensors, and is also compatible with all 8480 and E-series sensors. Learn more about available Keysight Power Sensor Cable.
KEYSIGHT E9288B Power Sensor Cable (3.0m/10 feet) Description The E9288B power sensor cable (blue) must be used with the E9320 family of peak and average power sensors, and is also compatible with all 8480 and E-series sensors. Learn more about available Keysight Power Sensor Cable.	KEYSIGHT E9288A Power Sensor Cable (1.5m/5 feet) Description The E9288A power sensor cable (blue) must be used with the E9320 family of peak and average power sensors, and is also compatible with all 8480 and E-series sensors. Can’t find what you’re looking for? Try our special option. Learn more about available Keysight Power Sensor Cable.	KEYSIGHT 11708A 30 dB Attenuator Pad (at 50 MHz) Description The Keysight 11708A 30 dB attenuator is supplied with 8480 series power sensors with the ''D'' suffix, for calibration with the power meter 0 dBm, 50 MHz reference. Factory set to 30 dB ± 0.05 dB at 50 MHz SWR: <1.05 at 50 MHz Traceable to U.S. National Institute of Standards and Technology (NIST) 1 year standard warranty	KEYSIGHT E4417A EPM-P Series Dual-Channel Power Meter Key Features & Specifications 20 Msample/s per second sampling rate for reliable continuous and single shot measurements on wide bandwidth signals Time-gated and free run power measurements Free ´Analyzer Software´ software for complete pulse and statistical analysis, software is located ´In the Library´ 8 pre-defined wireless configurations (GSM, EDGE, NADC, iDEN, Bluetooth, IS-95 CDMA, W-CDMA and cdma 2000) Description The E4417A dual channel EPM-P series power meter, is designed for peak, average, peak-to-average ratio and time-gated measurements, using the E9320 peak and average power sensors. 20 Msample/s per second sampling rate for reliable continuous and single shot measurements on wide bandwidth signals Time-gated and free run power measurements Free 'Analyzer Software' software for complete pulse and statistical analysis, software is located 'In the Library' 8 pre-defined wireless configurations (GSM, EDGE, NADC, iDEN, Bluetooth, IS-95 CDMA, W-CDMA and cdma 2000) Read the E4417A Data Sheet 1xEV-DO wireless systems — simplify development, verification, and manufacturing with the EPM-P power meters and E9320 E-Series power sensors Measurement Tip Need to connect this instrument to your PC? View our wide range of GPIB, USB and Instrument Control products Automate and perform data analysis on your test system easily with Keysight VEE Pro Can’t find what you’re looking for? Try our special option.
KEYSIGHT E4416A EPM-P Series Single Channel Power Meter Key Features & Specifications 20 Msample/s per second sampling rate for reliable continuous and single shot measurements on wide bandwidth signals Time-gated and free run power measurements Free ´Analyzer Software´ software for complete pulse and statistical analysis, software is located ´In the Library´ 8 pre-defined wireless configurations (GSM, EDGE, NADC, iDEN, Bluetooth™, IS-95 CDMA, W-CDMA and cdma2000) Description The E4416A single channel EPM-P series power meter, for peak, average, peak-to-average ratio and time-gated measurements, using the E9320 peak and average power sensors. 20 Msample/s per second sampling rate for reliable continuous and single shot measurements on wide bandwidth signals Time-gated and free run power measurements Free 'Analyzer Software' software for complete pulse and statistical analysis, software is located 'In the Library' 8 pre-defined wireless configurations (GSM, EDGE, NADC, iDEN, Bluetooth™, IS-95 CDMA, W-CDMA and cdma2000) 1xEV-DO wireless systems — simplify development, verification, and manufacturing with the EPM-P power meters and E9320 E-Series power sensors Measurement Tip Need to connect this instrument to your PC? View our wide range of GPIB, USB and Instrument Control products Automate and perform data analysis on your test system easily with Keysight VEE Pro Can’t find what you’re looking for? Try our special option.	KEYSIGHT N1914A EPM Series Dual-Channel Power Meter Key Features & Specifications Frequency range of 9 kHz to 110 GHz (sensor dependent) Wide dynamic range of -70 to +44 dBm (sensor dependent) Go beyond GPIB with LAN LXI-C and USB connectivity Code-compatible with E4418/19B power meters* and 436A/37B/38A power meters (option 200) Increased measurement channels: up to three channels with two additional U2000 Series power sensors connected using the optional USB hosts Automated frequency/power sweep measurements with the optional external trigger in/out feature A BenchVue software license (BV0007B) is now included with your instrument. BenchVue makes it simple to connect, control instruments, and automate test sequences. Description Consistent results and greater capability Get repeatable and reliable results for bench/rack and field applications with the N1913A and N1914A EPM series power meters. These power meters offer a measurement speed of up to 400 readings/second for fast, accurate average power measurements, and come with the industry’s first color LCD screen in an average power meter, allowing you to view and analyze test data more easily. A noteworthy enhancement from the conventional dual-channel power meter, EPM Series power meter enables four-channel power measurement by connecting U2000 Series USB power sensors via optional USB host. Connect U2000 Series USB power sensors to the EPM Series power meters via the optional USB hosts and get up four channels for power measurements. Code compatibility with legacy power meters Designed as versatile, user friendly replacements for the legacy Keysight EPM series power meters, the N1913A and N1914A are code compatible with the E4418B and E4419B EPM series. The N1913A and N1914A are also code compatible with the 436A, 437B and 438A power meters with the N191xA-200 options. Wide range of sensor options* The N1913A and N1914A EPM Series power meters are compatible with all E9300 series sensors (except E9320 series sensor), E4410 series sensors and N8480 series sensors, including 8480 discontinued models. Need to connect this instrument to your PC? View our wide range of GPIB, USB and Instrument Control products Automate and perform data analysis on your test system easily with Keysight VEE Pro. Use the Keysight BenchVue software to control your power meter to log data and visualize measurements in a wide array of display options without any programming. * there are some SCPI commands that are not available for E4418B and E4419B EPM series. Please refer to the FAQ for more information.	KEYSIGHT N1913A EPM Series Single-Channel Power Meter Key Features & Specifications Frequency range of 9 kHz to 110 GHz (sensor dependent) Wide dynamic range of -70 to +44 dBm (sensor dependent) Go beyond GPIB with LAN LXI-C and USB connectivity Code-compatible with E4418/19B power meters* and 436A/37B/38A power meters (option 200) Increased measurement channels: up to three channels with two additional U2000 Series power sensors connected using the optional USB hosts Automated frequency/power sweep measurements with the optional external trigger in/out feature A BenchVue software license (BV0007B) is now included with your instrument. BenchVue makes it simple to connect, control instruments, and automate test sequences. Description Consistent results and greater capability Get repeatable and reliable results for bench/rack and field applications with the N1913A and N1914A EPM series power meters. These power meters offer a measurement speed of up to 400 readings/second for fast, accurate average power measurements, and come with the industry’s first color LCD screen in an average power meter, allowing you to view and analyze test data more easily. A noteworthy enhancement from the conventional dual-channel power meter, EPM Series power meter enables four-channel power measurement by connecting U2000 Series USB power sensors via optional USB host. Connect U2000 Series USB power sensors to the EPM Series power meters via the optional USB hosts and get up four channels for power measurements. Code compatibility with legacy power meters Designed as versatile, user friendly replacements for the legacy Keysight EPM series power meters, the N1913A and N1914A are code compatible with the E4418B and E4419B EPM series. The N1913A and N1914A are also code compatible with the 436A, 437B and 438A power meters with the N191xA-200 options. Wide range of sensor options The N1913A and N1914A EPM Series power meters are compatible with all E9300 series sensors (except E9320 series sensor), E4410 series sensors and N8480 series sensors, including 8480 discontinued models. Need to connect this instrument to your PC?* View our wide range of GPIB, USB and Instrument Control products Automate and perform data analysis on your test system easily with Keysight VEE Pro. Use the Keysight BenchVue software to control your power meter to log data and visualize measurements in a wide array of display options without any programming. * there are some SCPI commands that are not available for E4418B and E4419B EPM series. Please refer to the FAQ for more information.	KEYSIGHT V3500A Handheld RF Power Meter Key Features & Specifications Broad 10MHz to 6GHz frequency range enables use in a wide variety of applications Wide dynamic range of -63dBm to +20dBm Integrated power sensor eliminates the need to carry a separate power sensor Internal power reference enable self calibration Absolute accuracy as good as ±0.21dB Powered from batteries, AC-DC converter module or a computer via USB interface Description The V3500A Handheld RF Power Meter is a compact, handheld instrument that makes accurate RF power measurements in both field and manufacturing applications. With an absolute accuracy as good as ±0.21dB, a wide frequency range of 10MHz to 6GHz, and a measurement range of -63dBm to +20dBm, the V3500A is suitable for a wide variety of RF measurement applications. Its built-in power sensor eliminates the need for users to carry both an instrument and a separate sensor module. Truly portable, the V3500A fits easily into your hand or a toolkit. An optional belt loop holster or carrying case with shoulder strap is also available. To optimize flexibility, it is capable of drawing operating power from batteries, an AC-DC converter module, or a computer via USB interface. For more information about Power Meter and Power Sensor, please visit Power Meter & Power Sensor
KEYSIGHT N1911A P-Series Single Channel Power Meter Key Features & Specifications 30 MHz video bandwidth Single shot real time capture at 100 Msample/s per second Key Measurements: - peak, average, peak-to-average ratio, rise time, fall time and pulse width 22 Predefined formats: WiMAX, DME, HSDPA, etc. One screen view for pulse measurement analysis: Auto Scale, Auto Gate, Rise/Fall Time, Duty Cycle, etc. Internal Zeroing and Calibration while connecting to the DUT A BenchVue software license (BV0007B) is now included with your instrument. BenchVue makes it simple to connect, control instruments, and automate test sequences. Description When used with the N192XA wideband power sensors, the N1911/12A P-Series power meter provides a measurement frequency range from 50 MHz to 40 GHz with an internal zero and calibration capability. LXI-C Compliance Average triggering for average power measurement Versatile connectivity with USB, LAN and GPIB standard High Speed Complementary Cumulative Distribution Function (CCDF) statistical analysis Compatible with the industry standard 8480 and E-series sensors which provide a wide dynamic range from -70 to +44 dBm, and a frequency coverage from 9 kHz to 110 GHz. Compatibility with E932x power sensors Difference and ratio math functions : (A-B, B-A, A/B and B/A) 2-year calibration cycle Can’t find what you’re looking for? Try our special options. Easy measurement with Software Downloads The N1911A/12A P-series power meters are supported by the Keysight BenchVue software. BenchVue makes it easy to control your power meter to log data and visualize measurements in a wide array of display options without any programming. Simply connect the sensor to your PC installed BenchVue BV0007B Power Meter/Sensor Control and Analysis app to perform complex pulse analysis and standard average power measurement. Need to connect this instrument to your PC? View our wide range of GPIB, USB and Instrument Control products Automate and perform data analysis on your test system easily with Keysight VEE Pro	KEYSIGHT W8486A Waveguide Power Sensor Key Features & Specifications Excellent SWR for reducing mismatch uncertainty 50 MHz calibration port Accurate calibration and traceability to US National Institute of Standards and Technology (NIST) millimeter-wave sensor calibration Compatible with EPM (new N1913A/ 14A, E4418B/ 19B), EPM-P (E4416A/ 17A) and P-series (N1911A/ 12A) power meters, plus the E1416A VXI and discontinued 70100A and 43X power meter Accurate average power measurements over -30 to +20 dBm Frequency range 75 GHz to 110 GHz Diode power sensing element Description The W8486A waveguide power sensor measures average power over the frequency range 75 GHz to 110 GHz and power range -30 to +20 dBm. Can’t find what you’re looking for? Try our special options.	KEYSIGHT 8487D Diode Power Sensor Key Features & Specifications Excellent SWR for reducing mismatch uncertainty Accurate calibration and traceability to US National Institute of Standards and Technology (NIST) millimeter-wave sensor calibration Compatible with EPM (new N1913A/ 14A, E4418B/ 19B), EPM-P (E4416A/ 17A) and P-series (N1911A/ 12A) power meters, plus the E1416A VXI and discontinued 70100A and 43X power meter Accurate average power measurements over -70 to -20 dBm Frequency range 50 MHz to 50 GHz Diode power sensing element Description The 8487D diode power sensor measures average power over the frequency range 50 MHz to 50 GHz and power range -70 to -20 dBm (50 dB dynamic range). The Keysight 11708A 30 dB attenuator is supplied with 8480 series power sensors with the ''D'' suffix, for calibration with the power meter 0 dBm, 50 MHz reference. Can’t find what you’re looking for? Try our special options.	KEYSIGHT V8486A Waveguide Power Sensor Key Features & Specifications Excellent SWR for reducing mismatch uncertainty 50 MHz calibration port Accurate calibration and traceability to US National Institute of Standards and Technology (NIST) millimeter-wave sensor calibration Compatible with EPM (new N1913A/ 14A, E4418B/ 19B), EPM-P (E4416A/ 17A) and P-series (N1911A/ 12A) power meters, plus the E1416A VXI and discontinued 70100A and 43X power meter Accurate average power measurements over -30 to +20 dBm Frequency range 50 GHz to 75 GHz Diode power sensing element Description The V8486A waveguide power sensor measures average power over the frequency range 50 GHz to 75 GHz and power range -30 to +20 dBm. Can’t find what you’re looking for? Try our special option.
1 - 24 of 66 \|<1 2 3 >\|

© 2019 - 2024 Mobicon - Remote Electronic Sdn Bhd (548591-V)
Visitors: 3774843
Powered by N.MY

Recent Updates