PQ3350-3: 3-Phase Power & Harmonics Analyzer

Complete with 3000A 24'' flexible current clamp probes

Complete with 3000A 18'' flexible current clamp probes. Datalogging of single and 3-phase/3-wire or 3-phase/4-wire systems (up to 52,428 single phase readings or 17,476 3-phase readings). Flexible clamp probes can be used for wrapping around bus bars and wire bundles. Large backlighting LCD displays up to 35 parameters in one screen. Clamp-on True RMS power measurements with on-screen Harmonics display. Simultaneous display of Harmonics and Waveform. Display of Waveform with Peak Values (1024 samples/period). Analysis of Total Harmonic Distortion (THD-F). Maximum Demand (MDkW, MW, kVA, MVA) with programmable period. Adjustable CT ratio (1 to 600) and VT ratio (1 to 3000). Graphic Phase diagram with 3-Phase system parameters. 3-phase Voltage or Current Unbalanced Ratio (VUR, VIR) and Unbalanced Factor (d0%, d2%). Calculated Unbalanced Current through Neutral Line (In). Capture 28 Transient events (including Dip, Swell and Outage) with programmable threshold (%). Optically isolated USB interface with software to download Waveforms, Power Parameters and Harmonics. Includes 3 flexible current clamps, 4 voltage leads with alligator clips and retractable plunger clips, 8 AA batteries, universal AC adaptor, software, USB interface cable, and case.

Features
 

• Datalogging of single and 3-phase/3-wire or 3-phase/4-wire systems (up to 52,428 single phase readings or 17,476 3-phase readings)
• Flexible clamp probes can be used for wrapping around bus bars and wire bundles
• Large backlighting LCD displays up to 35 parameters in one screen
• Clamp-on True RMS power measurements with on-screen Harmonics display
• Simultaneous display of Harmonics and Waveform
• Display of Waveform with Peak Values (1024 samples/period)
• Analysis of Total Harmonic Distortion (THD-F)
• Maximum Demand (MDkW, MW, kVA, MVA) with programmable period
• Adjustable CT ratio (1 to 3000) and VT ratio (1 to 600)
• Graphic Phase diagram with 3-Phase system parameters
• 3-phase Voltage or Current Unbalanced Ratio (VUR, VIR) and Unbalanced Factor (d0%, d2%)
• Calculated Unbalanced Current through Neutral Line (In)
• Capture 28 Transient events (including Dip, Swell and Outage) with programmable threshold (%)
• Optically isolated USB interface with software to download Waveforms, Power Parameters and Harmonics
• Includes 3 flexible current clamps, 4 voltage leads with alligator clips and retractable plunger clips, 8 AA batteries, universal AC adaptor, software, USB interface cable, and case

PQ3350-1: 3-Phase Power & Harmonics Analyzer

Complete with 1200A 12'' flexible current clamp probes

Complete with 1200A 12'' flexible current clamp probes. Datalogging of single and 3-phase/3-wire or 3-phase/4-wire systems (up to 52,428 single phase readings or 17,476 3-phase readings). Flexible clamp probes can be used for wrapping around bus bars and wire bundles. Large backlighting LCD displays up to 35 parameters in one screen. Clamp-on True RMS power measurements with on-screen Harmonics display. Simultaneous display of Harmonics and Waveform. Display of Waveform with Peak Values (1024 samples/period). Analysis of Total Harmonic Distortion (THD-F). Maximum Demand (MDkW, MW, kVA, MVA) with programmable period. Adjustable CT ratio (1 to 600) and VT ratio (1 to 3000). Graphic Phase diagram with 3-Phase system parameters. 3-phase Voltage or Current Unbalanced Ratio (VUR, VIR) and Unbalanced Factor (d0%, d2%). Calculated Unbalanced Current through Neutral Line (In). Capture 28 Transient events (including Dip, Swell and Outage) with programmable threshold (%). Optically isolated USB interface with software to download Waveforms, Power Parameters and Harmonics. Includes 3 flexible current clamps, 4 voltage leads with alligator clips and retractable plunger clips, 8 AA batteries, universal AC adaptor, software, USB interface cable, and case

Features
 

• Datalogging of single and 3-phase/3-wire or 3-phase/4-wire systems (up to 52,428 single phase readings or 17,476 3-phase readings)
• Flexible clamp probes can be used for wrapping around bus bars and wire bundles
• Large backlighting LCD displays up to 35 parameters in one screen
• Clamp-on True RMS power measurements with on-screen Harmonics display
• Simultaneous display of Harmonics and Waveform
• Display of Waveform with Peak Values (1024 samples/period)
• Analysis of Total Harmonic Distortion (THD-F)
• Maximum Demand (MDkW, MW, kVA, MVA) with programmable period
• Adjustable CT ratio (1 to 600) and VT ratio (1 to 3000)
• Graphic Phase diagram with 3-Phase system parameters
• 3-phase Voltage or Current Unbalanced Ratio (VUR, VIR) and Unbalanced Factor (d0%, d2%)
• Calculated Unbalanced Current through Neutral Line (In)
• Capture 28 Transient events (including Dip, Swell and Outage) with programmable threshold (%)
• Optically isolated USB interface with software to download Waveforms, Power Parameters and Harmonics
• Includes 3 flexible current clamps, 4 voltage leads with alligator clips and retractable plunger clips, 8 AA batteries, universal AC adaptor, software, USB interface cable, and case

PQ3350: 3-Phase Power & Harmonics Analyzer

Meter with Test Leads and Storage/Carrying Case

Power measurements and analysis + datalogging of single and 3-phase/3-wire or 3-phase/4-wire systems (up to 52,428 single phase readings or 17,476 3-phase readings). Large backlighting LCD displays up to 35 parameters in one screen. Clamp-on True RMS power measurements with on-screen Harmonics display. Simultaneous display of Harmonics and Waveform. Display of Waveform with Peak Values (1024 samples/period). Analysis of Total Harmonic Distortion (THD-F). Maximum Demand (MDkW, MW, kVA, MVA) with programmable period. Adjustable CT ratio (1 to 600) and VT ratio (1 to 3000). Graphic Phase diagram with 3-Phase system parameters. 3-phase Voltage or Current Unbalanced Ratio (VUR, VIR) and Unbalanced Factor (d0%, d2%). Calculated Unbalanced Current through Neutral Line (In). Capture 28 Transient events (including Dip, Swell and Outage) with programmable threshold (%). Optically isolated USB interface with software to download Waveforms, Power Parameters and Harmonics. Includes 4 voltage leads with alligator clips and retractable plunger clips, 8 AA batteries, universal AC adaptor, software, USB interface cable, and case. Current Probes sold separately.

Features
 

• For single and 3-phase/3-wire or 3-phase/4-wire systems
• Datalog up to 52,428 single phase readings or 17,476 3-phase readings
• Large backlighting LCD displays up to 35 parameters in one screen
• Simultaneous display of Harmonics and Waveform
• Current Probes sold separately

Extech DL160: Dual Input True RMS AC Voltage/Current Datalogger

Datalog up to 256,000 readings with user programmable sample rate

The DL160 is a Dual Input True RMS AC Voltage/Current Data logger. Simultaneously data log 2 channels of up to 256,000 readings of TRMS AC Voltage (600V) or Current (200A) or one AC Voltage and one AC Current input with a user programmable sample rate from 1 second to 24 hours. LCD displays time/date, current reading, and min/max. Readings can be downloaded to your PC via the USB interface. Featuring Normal, Peak, and Capture (user specified trigger level) recording modes. Complete with 2 current clamps, two sets of test leads, 2 sets of alligator clips, software, USB cable, Universal AC Adapter, and 4 x AAA and 2 x CR2032 Batteries.

Features
 

• Simultaneously measure two AC Voltage inputs or two AC Current inputs or one AC Voltage and one AC Current input
• Readings can be downloaded to your PC via the USB interface and analyzed using the included software or exported to a spreadsheet
• LCD indicates time/date, current readings and Min/Max
• Auto Power off and battery check
• Complete with 2 Current and Voltage sensor modules, two sets of test leads and alligator clips, USB cable, Windows® software, AC Adaptor and four AAA batteries

382100: 1200A 3-Phase Power Analyzer/Datalogger

Datalogging Power Analyzer (up to 30,000 sets of measurements)

The 382100 is a 3-Phase Power Analyzer/Datalogger that saves data (up to 30,000 sets of measurements) on an SD card in Excel format for easy transfer to your PC. It provides a full system analysis with up to 35 parameters including: V (phase-to-phase), V (phase-to-ground) - A (phase-to-ground), KW / KVA / KVAR / PF (phase), KW / KVA / KVAR / PF (system), KWH / KVAH / KVARH / PFH (system), and Phase Angle. Readings are displayed on a large, dot matrix, sun-readable, backlit LCD. Comes with three current clamps, four voltage leads with alligator clips, eight AA batteries, SD memory card, Universal AC adapter (100 to 240V), case, and user manual.

Features
 

• Single phase, 3-phase/3-wire or 3-phase/4-wire systems
• Large backlighting LCD displays 35 parameters simultaneously (MW, kVAR, MVA, PF plus the voltage and current of the 3 phases)
• Displays Active Power (kW), Apparent Power (kVA), Reactive Power (kVAR) and Power Factor
• Current measurements to 1200A and Voltage measurements to 600V
• MWH, MVAh, MVARh energy measurements
• Adjustable CT ratio (1 to 600) and PT ratio (1 to 1000)
• Automatically logs up to 30,000 sets of measurements with 2GB SD memory card
• User-programmable sampling time from 2 to 7200 seconds

96VFL13: 1/4 DIN Temperature PID Controller with 4-20mA Output

Fuzzy Logic PID, Auto Tuning, and Soft Start features

• 4-20mA output
• Dual 4-digit LED displays of process and setpoint values
• User friendly menus and tactile keypad for easy programming
• One-touch autotuning for quick setup & precise control
• Fuzzy Logic PID offers intuitive control simulating human control logic
• Two ''Latching'' alarm relays standard with 8 Alarm modes
• Accepts thermocouple and RTD inputs

96VFL11: 1/4 DIN Temperature PID Controller with Two Relay Outputs

Fuzzy Logic PID, Auto Tuning, and Soft Start features

• Two relay outputs
• Dual 4-digit LED displays of process and setpoint values
• User friendly menus and tactile keypad for easy programming
• One-touch autotuning for quick setup & precise control
• Fuzzy Logic PID offers intuitive control simulating human control logic
• Two ''Latching'' alarm relays standard with 8 Alarm modes
• Accepts thermocouple and RTD inputs
• This product is also available with 4-20mA output - 96VFL13  

48VFL13: 1/16 DIN Temperature PID Controller with 4-20mA Output

Fuzzy Logic PID, Auto Tuning, and Soft Start features

• 4-20mA output
• Dual 4-digit LED displays of process and setpoint values
• User friendly menus and tactile keypad for easy programming
• One-touch autotuning for quick setup & precise control
• Fuzzy Logic PID offers intuitive control simulating human control logic
• Two ''Latching'' alarm relays standard with 8 Alarm modes
• Accepts thermocouple and RTD inputs

48VFL11: 1/16 DIN Temperature PID Controller with One Relay Output

Fuzzy Logic PID, Auto Tuning, and Soft Start features

• One relay output
• Dual 4-digit LED displays of process and setpoint values
• User friendly menus and tactile keypad for easy programming
• One-touch autotuning for quick setup & precise control
• Fuzzy Logic PID offers intuitive control simulating human control logic
• Two ''Latching'' alarm relays standard with 8 Alarm modes
• Accepts thermocouple and RTD inputs
• This product is also available with 4-20mA output - 48VFL13  

PRT200: Non-Contact Phase Sequence Tester

Tests up to 1000VAC with visual/audible indication

• 75 to 1000VAC input voltage with 45 to 65Hz frequency range
• LEDs indicate phase orientation (clockwise or counter-clockwise) and whether each phase is live
• Beeper sounds intermittently when correct phase is detected and continuously if phase is reversed
• Durable housing with back cover magnet for attachment to an AC distribution panel for easy measurement
• Adjustable Hi/Lo LED brightness switch for making measurements in dimly lit areas or sunlight
• Fully insulated alligator clips with wide jaws
• Low battery warning
• Complete with three built-in 30'' test leads with large color-coded alligator clips, four AA batteries, and pouch case

480403: Motor Rotation and 3-Phase Tester

Tests phase sequence and motor rotation

• Indicates rotation direction of the motor
• Determine rotation of a motor without contact
• LEDs indicate phase orientation (clockwise or counter-clockwise) and whether each of the three phases is live
• Double molded durable housing
• Easy to use alligator clips with wide jaws

480400: Phase Sequence Tester

Displays graphical phase orientation

• Checks phase sequence and phase status
• Tests up to 600VAC and displays graphical phase orientation on the large LCD
• Double molded durable housing
• Easy to use alligator clips with wide jaws

PD20: Thermo-Pedometer

Pocket-Size Pedometer with 3D Sensor For Detecting Motion Regardless of Orientation

• 3D motion sensor design allows for the meter to be fully functional regardless of its orientation
• Uses an intelligent algorithm to filter out non-walking movements
• Functions:
  • Number of Steps: 0 to 99999 (adjustable step length)
  • Temperature: 14 to 122°F (-10 to 50°C)
  • Calorie consumption: 0 to 99999kcal
  • Fat burned: 0 to 35.9oz (0 to 999.9g)
  • Distance covered: 0 to 624.99mi (0 to 999.99 km)
  • Time: 12/24 hour format
  • Average speed: 0 to 6.25mph (0 to 10km/h)
• Coninuous Step mode records the number of steps users walked continuously through the day (records up to 7 days)
• Total Step mode displays the total accumulated steps user walked after 7-day storage
• Auto power saving mode when meter detects no movement for 10 minutes
• Includes case with built-in clip to wear on your clothes and designed with lanyard insert hole (lanyard not included) to wear around your neck
• Complete with CR2032 battery and nylon case with window opening for display viewing and belt-clip

TL620: 200MHz 1X/10X Oscilloscope Probe

Replacement Probe for MS6000 series Oscilloscopes

• Compatible with MS6060 and MS6100 2-channel digital oscilloscopes

BATT-74V: 7.4V Li-Ion Rechargeable Battery

Replacement battery for MS6000 series Oscilloscopes

• Rechargeable
• 7.4V Lithium Ion
• 3500mAh

MS420: 20MHz 2-Channel Digital Oscilloscope

Dual-channel Oscilloscope with 3.8'' (97mm) color LCD display

• Auto-set function optimizes the position, range, timebase, and triggering to assure a stable display of waveforms
• Peak Detect function for 50ns glitch capture
• XY Mode and FFT function to view component frequencies
• Twenty Automatic Measurements including Frequency, Cycle, Average, Peak to Peak, RMS and more
• Waveform Math: Add, Subtract, Multiply, and Divide
• Average Mode for smoothing waveforms
• Persistence Mode for observing dynamic signals
• Store and recall up to 4 waveform screens and setups
• USB interface and software for transferring waveforms and data

Extech 881602: Type K Surface Probe (-40 to 932°F)

Type K high temperature probe with mini connector

• High temperature range: -40 to 932°F (-40 to 500°C)
• 70.8'' (1.8m) coiled cable with Type K mini connector
• Compatible with most multimeters that have Type K temperature function
• 6'' (150mm) probe length; 0.314'' (8mm) diameter

881616: Magnetized Type K Surface Probe (-40 to 392°F)

Type K temperature probe with mini connector

• Temperature range: -40 to 392°F (-40 to 200°C)
• Probe surface area: 1'' x 0.75'' (25.4mm x 19mm)
• 6ft (1.8m) teflon cable with strain relief

CA900: Wide Carrying Case for MultiMeter Kits

Soft vinyl carrying case (9.5 x 7.2 x 2.9'') with wrist strap

• Size: 9.5 x 7.2 x 2.9'' (241 x 182 x 73mm)

CA904: Hard Plastic Carrying Case

Carrying case (11.7 x 8.9 x 3'') with foam insert and accessories pouch

• Size: 11.7 x 8.9 x 3'' (297 x 226 x 76mm)

TP200: Type K Pipe Clamp Temperature Probe (-4 to 200°F)

Hands-free superheat/subcooling temperature measurement

• Spring-loaded jaw for secure grip on pipe from 0.25'' (6.35mm) to 1.5'' (38mm) diameter
• For use with any Thermometer or MultiMeter with a Type K thermocouple input
• Measurement range: -4 to 200°F (-20 to 93°C)
• Accuracy: ±5% full scale
• Complete with attached 36'' (0.9m) cable and Type K connector

TP400: High Temperature Type K Pipe Clamp (-4 to 450°F)

Hands-free superheat/subcooling temperature measurement

• Spring-loaded jaw for secure grip on pipes from 0.25'' (6.35mm) to 1.5'' (38mm) diameter
• For use with any Thermometer or MultiMeter with a Type K thermocouple input
• Measurement range: -4 to 450°F (-20 to 232°C)
• Accuracy: ±3.6°F (1.8°C)
• Complete with attached 36'' (0.9m) cable and Type K connector